OM605/606

Instrukcja serwisowa silnika OM605/606 (Mercedes-Benz, oryginał po angielsku), odczytana ze skanów WIS. Rozdziały według grup instrukcji.

General, technical data

  1. ee #f G14 ARO0.00-X-1000Z

Engine removal and installation, ventilation, crankcase

  1. D3 ARO1.10-P-01108 Cranking engine with starter
  2. G3 ARO1.10-P-0110D Cranking engine with starter
  3. J3 ARO1.10-P-0110HA Cranking engine with starter
  4. Al ARO1.00-P-0200HA 1
  5. F1 ARO1.00-P-1200HA Testing compression pressure 2.4.93
  6. onan # M1 ARO1.00-P-1300HA 1
  7. ohn # M3 ARO1.10-P-2400HA
  8. ARO1.10-P-2400HB Removing, installing engine 10.2.94
  9. P4 ARO1.10-P-2400HC Removing, installing engine 1.10.96
  10. aie # D2 ARO1.00-P-2410D 1
  11. oan ; # G2 AR01.00-P-2410G i
  12. J2 ARO1.00-P-2410H Disconnecting, connecting engine wiring harness
  13. N2 ARO1.00-P-2410HA Disconnecting, connecting engine wiring harness 2.4.93
  14. A3 ARO01.00-P-2410HB Disconnecting, connecting engine wiring harness 10.2.94
  15. ae #355 ARO1.20-P-5014HA 1
  16. nti # M5 ARO1.30-P-5402HA 1
  17. P5 ARO1.30-P-5B00HA Removing, installing cylinder head 2.4.93
  18. one # 06 ARO1.30-P-7162B 1
  19. eae # B11 AR01.45-P-7500C 1
  20. O11 ARO1.45-P-7500D Removing, installing oil sump 17.2.95
  21. J10 ARO1.45-P-7500HA Removing, installing oil sump 2.4.93
  22. E7 ARO1.40-P-8000HA Removing, installing timing case cover 2.4.93
  23. E7 ARO1.40-P-8000HA Removing, installing timing case cover 2.4.93 (continued)
  24. ike # H8 AR01.40-P-8499HA 1
  25. qi # M8 ARO1.40-P-8913HA
  26. cg ARO1.40-P-91338 Machining crankcase contact surface
  27. ite . # G9 ARO1.40-P-9202A 1
  28. cote #19 ARO01.40-P-9271A 1
  29. ae # PO ARO1.40-P-9272A 1
  30. c10 ARO1.40-P.9273A Installing cylinder liner 20.9.96
  31. mite # E10 ARO1,40-P-9291A 1

Crankshaft assembly

  1. n # Al ARO3.00-P-1101HA
  2. D4 AR03.30-P-1600HA Removing and installing belt pulley/vibration damper 2.4.93
  3. penn # P4 GFO3.30-P-1600HB 1
  4. ie #B5 GFO03.30-P-1600HC
  5. DS GF03.30-P-1600HD Belt pulley/vibration damper as-built configuration 23.1.98
  6. te # F5 GF03.30-P-1600HE
  7. onion #12 ARO3.20-P-3000HA
  8. onion #12 ARO3.20-P-3000HA (continued)
  9. Es ARO3.20-P-43518 Removing and installing crankshaft 23.4.96
  10. Cal # J3 ARO3.20-P-4355A 1
  11. mms #H5 ARO3.30-P-5000HA
  12. oma # G1 ARO3.10-P-6111HA 1
  13. 01 ARO3.10-P-7021B Removing, and installing pistons 23.4.96
  14. am # G2 ARO3.10-P-7311HA 1
  15. PS ARO3.30-P-8001HA Removing and installing flywheel/driven plate 10.2.94
  16. ae # F6 ARO3.30-P-8022A 1
  17. aie # K6 ARO3.30-P-8312A 1
  18. ite # N6 ARO3.30-P-8400A 1
  19. ite # Aa AR03.20-P-8400HA 1

Engine timing, valve train

  1. a #B1 AROS5.00-P-2010HW 1
  2. oon #D1 AROS5.00-P-2011HY 1
  3. ae # M4 ARO05.30-P-3500HA
  4. DS AROS.30-P-3511B Removing, installing valves
  5. ae #55 AROS.30-P-3731A 1
  6. A6 ARO5.30-P-3831A Replacing valve seat rings 14.10.96
  7. F1 GFOS.10-P-4000HA Timing chain drive as-built 22.1.98
  8. onion # G6 ARO5.30-P-4201A 1
  9. asain # L6 ARO5.30-P-4511 1
  10. J2 AROS.20-P-6010HA Checking basic position of camshafts 2.4.93
  11. aie # M2 AROS.20-P-6015HB 1
  12. C3 ARO5.20-P-6020HA Adjusting basic position of camshafts 2.4.93
  13. Removing, installing end cover for camshafts
  14. oie #N3 ARO5.20-P-6992HA 1
  15. Fa AROS.20-P-6995HA
  16. ote #H1 ARO5.10-P-7601HA 1
  17. ae # M1 ARO5.10-P-7800HA 1
  18. a # A2 ARO5.10-P-8127HA 1
  19. a #C2 = —AROS.10-P-8432HB 1
  20. onan # G2 AROS5.10-P-8484HA 1

Diesel injection system

  1. Installation survey
  2. Survey of injection pumps, injection nozzles
  3. Vacuum diagrams
  4. Testing, adjusting engine
  5. Testing engine output at exhaust emissions on the roller
  6. Testing and adjusting vacuum control valve for automatic
  7. Testing anti-jerk control (ARA)
  8. Testi vacuum cutoff for leaks
  9. 07.1–1 1843 Testing vacuum pump
  10. Removing and installing ELR actuator
  11. Removing and installing ARA actuator
  12. Re ‘ing ancl installing coolant temperature sensor
  13. Testing electronic idle speed control (ELR)
  14. Testing pneumatic idle ‘speed increase (PLA)
  15. Testing, adjusting idle speed
  16. Operation no. of operation texts and work units or standard texts
  17. Testing fuel pump (delivery)
  18. Testing fuel pressure (after testing delivery)
  19. Operation no. of operation texts and work units or standard texts
  20. Testing injection nozzles
  21. Servicing, adjusting injection nozzles
  22. Removing and installing injection nozzles
  23. Removing and installing inje ction timing device
  24. Servicing injection timing device
  25. Operation no. of operation texts and work units or standard texts
  26. Adjusting start of delivery with digital tester (RIV method)
  27. Adjusting microswitch at injection pump
  28. Removing and installing injection pump
  29. Removing and installing vacuum unit ( stop)
  30. Operation no. of operation texts and work units or standard texts
  31. Removing and installing microswitch at injection pump
  32. Operation no. of operation texts and work units or standard texts

Air intake, air cleaner, turbocharger

  1. Operation no. of operation texts and work units or standard texts
  2. Removing and installing air cleaner cross pipe

Belt drive

  1. Removing and installing air cleaner cross pipe (continued)
  2. L7 GF13.25-P-3200A Poly V-belt tensioning device as-built configuration 23.1.98
  3. AR13. Removing, installing poly V-belt tensioning device 2.4.93
  4. ie #N7 AR13.25-P-3210HA 1

Intake and exhaust manifold, emission control

  1. Removing and installing intake manifold, replacing gasket
  2. Removing and installing resonance flap of intake manifold
  3. Removing and installing resonance intake manifold, replacing
  4. Removing and installing resonance intake line
  5. Removing and installing resonance flap switchover valves
  6. ssonance flap
  7. 14. 3915 Removing and installing exhaust manifold
  8. Operation no. of operation texts and work units or standard texts
  9. Testing variable intake manifold system
  10. Testing exhaust gas recirculation
  11. Removing and installing vacuum amplifier

Electrical system engine

  1. Operation no. of operation texts and work units or standard texts
  2. Testing preglow system
  3. Removing and installing glow plugs

Engine lubrication

  1. B1 AR18.00-P-00258 Measuring oil consumption 27.4.95
  2. H3 AR18.30-P-1000A Removing and installing engine oil cooler 4.11.96
  3. F1 AR18.00-P-1250A Testing oil pressure 10.2.94
  4. D4 AR18.40-P-1251A Testing oil pressure sensor 10.2.94
  5. oma # A2 AR18.10-P-2140HA
  6. tite # A3 AR18.20-P-3471HA 1
  7. M3 AR18,30-P-3480HA Removing, installing oil-to-water heat exchanger at oil sump
  8. M3 AR18,30-P-3480HA Removing, installing oil-to-water heat exchanger at oil sump (continued)
  9. oxi # B4 AR18.30-P-3481B 1
  10. oxi # B4 AR18.30-P-3481B 1 (continued)
  11. oxi # B4 AR18.30-P-3481B 1 (continued)
  12. oxi # B4 AR18.30-P-3481B 1 (continued)
  13. aim # G2 AR18.10-P-5031HA
  14. L2 AR18,10-P-6020HA Removing and installing oil pump 27.7.94

Engine cooling

  1. Coolant circuit function
  2. an P5 AR20.00-P-1010HA 1
  3. D6 AR20.00-P-1142HW Draining, filling system with engine coolant 9.7.97
  4. M6 AR20.00-P-1250A Removing oil in cooling and heating system 10.2.94
  5. im # P6 AR20.10-P-1270HA
  6. im # P6 AR20.10-P-1270HA (continued)
  7. AR20.10-P-2460HA Removing and engine installing coolant thermostat 2.4.93
  8. ae # P7 AR20.20-P-3865HA
  9. F8 AR20.20-P-3865HB Removing and installing radiator
  10. hain # 08 AR20.30-P-4300HA 1
  11. D9 AR20.30-P-4540A Removing, installing overflow reservoir
  12. ie # FO AR20.40-P-5660HA
  13. J9 AR20.40-P-5660HB Removing, installing viscous fan coupling
  14. 09 AR20.40-P-6800HA Removing, installing fan shroud

Engine suspension

  1. aie AR22.10-P-1160HA 1
  2. D10 AR22.10-P-1260HA Removing and installing front engine mounts and/or engine brackets 2.4.93

Throttle control

  1. Adjusting accelerator control
  2. Operation no. of operation texts and work units or standard texts
  3. Removing and installing firewall pivot bearing with accelerator
  4. Removing and installing, replacing Bowden cable
  5. Removing and installing tension-compression damper

Fuel system

  1. Removing and installing fuel tank
  2. Removing and installing fuel gauge sender

Exhaust system

  1. Replacing center, tail muffler
  2. Removing and installing, replacing oxidation catalytic converter or
  3. Rem installing exhaust sys’ tem complete
  4. Removing and installing exhaust system downstream of flanged

Miscellaneous: functional descriptions, general information, testing

  1. D17 AHoo.00-x-10002 General notes
  2. C17 AP18.00-P-0101-02z Extracting engine oil
  3. 418 Avi00.00-x-10002 Modification note 1.7.99
  4. C18 wro0.00-x-10002 Shop-made tools 1.7.99
  5. aide # G17 AS00.00-X-10002 1
  6. M17 Bt00.00-x-1000z Technical modifications 1.7.99
  7. om # EW AR00.00-X-10002Z 1
  8. E18 croo.oo-x-1000 Function descriptions, model/equipment 21.6.99
  9. ate # P16 AHO00.00-X-1000Z
  10. 18 Axoo.00-x-10002 Modification note
  11. B17 asoo.o0-x-10002 Special tools 21.6.99
  12. E17 Btoo.o0-x-100z Technical modifications /21.6.99
  13. K17 Poly V-belt damage patterns AP13.22-P-1351-01A
  14. K18 AH00.00-X- 10002 Modification note
  15. K18 AH00.00-X- 10002 Modification note (continued)
  16. K18 AH00.00-X- 10002 Modification note (continued)
  17. K15 AROS.10-P-7601-034 Separating, riveting timing chain ‘131 602 589 04 63 00 Pressing screw
  18. H18 os00.00-x-10002 Special waste disposal 1.7.99
  19. P17 GFo0.00-x-10002 Function descriptions, model/equipment
  20. H16 AHO0.00-X-1000Z General notes 28.6.99
  21. ain # FIG APO0.00-X-1000Z 1
  22. G18 Axoo.00-x-1002 Modification note
  23. C1 8 WF00.00-X-1000Z Shop-made tools
  24. F17 asoo.00-x-1000z Special tools 28.6.99
  25. K17 Technical modifications 28.6.99
  26. 013 AR18.00-P-0025-01A Matching oil consumption to dipstick
  27. Revisions Engine 605.911, 606.910 Combustion M/RSF
  28. Programmed repairs engine 605.911, 606.910 Combustion M/RSF
  29. Technical modifications Engine 605.911, 606.910 Combustion M/RSF