Technical modifications Engine 605.911, 606.910 Combustion M/RSF

WIS misc-tm

TDC sensor bracket A new TDC sensor bracket is May 1995 installed with introduction of the vibration damper with integrated hub Engine 605.911

Vacuum control valve modified. July 1994 07.1-0005 Restrictor integrated in vacuum 07.1-1826 control valve; the restrictor in the vacuum pipes is thus discontinued.

07.1-5701 Fuel feed pipe from fuel filter to September 1995 07.1-5702 injection pump converted from plug 07.1-8410 connection to screw attachment.

Screws of cylinder head Conversion to self-tapping screws December 1993 07.1-6830 cover trim panel for attaching cylinder head cover 07.1-9290 trim panel to cylinder head cover.

Leak oil hose Leak oil hoses between nozzle February 1994 holders modified. Standardization with all two-valve engines.

Conversion to light-colored hoses October 1995 for leak oil hoses for assembly reasons.

Injection timing device Segment flange of injection timing June 1994 07.1-8014 device modified frorn forging to 07.1-8050 sintered part. New injection timing 07.1-8410 device is installed with washer.

TA P1RB07.99.1699 /1

Designation Nature and reason for modification Breakpoint Op. no.

Overflow valve Overflow valve modified. September 1993 07.1-8410 Overflow valve with O-ring for

Fuel hose Fuel hose from top part of oil filter 07.1-8410 to retum flow pipe modified. Check valve in fuel return hose (immobilizer), Engine 605.911 March1994 Engine 606.910 April 1994

Technical modifications Engine 605.911, 606.910 Combustion M/RSF – rysunek

Fuel hose Fuel hose from top part of oil filter 07.1-8410 to retum flow pipe modified to improve starting. Engine 605.911 January 1995 Engine 606.910 February 1995

pump modified for tolerance reasons.

Bracket of intake manifold/ Bracket of intake manifold/ August 1993 09-8031 resonance intake manifold resonance intake manifold modified 14-1961

Gasket of resonance Gasket of resonance intake January 1996 14-1961 intake manifold manifold modified Engine 606.910

Exhaust manifold Tightening torque of exhaust September 1994 manifold to cylinder head increased from 23 Nm to 30 Nm (retightening discontinued).

Clamp of corrugated pipe Welded nut at clamp of corrugated May 1995 14-3915 pipe at exhaust manifold and at 14-7265 EGR valve discontinued.

Clamp of corrugated pipe Screw for EGR clamp standardized. July 1995 14-3915

TA P1RB07.99.1699 /2

Technical modifications Engine 605.911, 606.910 Combustion M/RSF – rysunek

cylinder head standardized with engine 111 Engine 605.911

Seal of EGR valve Seal between EGR valve and November 1995 14-7265 pressure contro! flap housing standardized with engine 602.98. EGR/variable intake Shut-off speed of exhaust gas approx, 14-7611 system control rnodule recirculation function modified to October 1993 (N37/3) avoid blue exhaust. Control module part no. 061 545 95 32 or 016 545 91 32.

Restoring spring Restoring spring modified. June 1993 30-1010 Strengthened restoring spring 30-4105 ensures accelerator control damper moves back when engine idling. Engine 605.911, 606.910 with automatic transmission.

Restoring spring Restoring spring at injection pump September 1993 30-1010 with increased spring force. Engine 30-4105 605.911, 606.910 with manual transmission.

TA P1RB07.99.1699 /3