D17 AHoo.00-x-10002 General notes
WIS misc-mech1-general
aa
#D17 AHO00.00-X-1000Z 2
E17 AH20.00-N-2080-01A Instructions re coolant
Coolant composition @® A concentration of anticorrosion/antifreeze agent higher than Passenger car and commercial vehicle engine (normal case): 50 % by volume water and 55 % by volume should not be used as the maximum antifreeze 50 % by volume anticorrosion/antifreeze agent. protection is thus reached. An even higher concentration again See MB Specifications for Service Products for differing coolant . reduces the antifreeze protection and impairs heat dissipation. composition for commercial vehicle engines.
Water
Purposes of anticorrosion/antifreeze agent
Use water which is clean and not too hard. Drinking water e@ Corrosion and cavitation protection for all components in the frequently, but not always, satisfies the requirements. The cooling system contents of dissolved substances in the water can be of
e Antifreeze protection
importance for the occurrence of corrosion. In cases of doubt, e Increasing boiling point so that the coolant does not evaporate analyze the water. See MB Specifications for Service Products for so rapidly. Ejection of coolant is avoided at high coolant _ fresh water regulations. temperatures.
Operation of monitoring of coolant
Antifreeze protection Inspect coolant for resistance to low temperatures before the start 50 % by volume of anticorrosion/antifreeze concentration offers of the cold season of the year. antifreeze protection down to approx. -37 °C. In countries with high ambient temperatures, inspect the A higher concentration is only practical at even lower ambient anticorrosion/antifreeze concentration once a year. The corrosion protection in the coolant is reduced during temperatures. 55 % by volume of anticorrosion/antifreeze concentration offers operation. Such coolants have a severely corrosive effect. antifreeze protection down to approx. -45 °C. The maximum permissible period of use of the coolant is for passenger car and commercial vehicle engines (normal case) 3 years. See MB Specifications for Service Products for the period of use for differing coolant composition for commercial vehicle engines.
Disposing of coolants
(®) Before pouring fresh coolant into the system, flush the used Observe legal regulations and local wastewater regulations. coolant out of the cooling system. Clean cooling system if severe For workshops located in the Federal Republic of Germany see: soiling or oil contamination exist. “Umweltschutz-Handbuch fur Kfz-Reparaturbetriebe” (Environmental protection manual for vehicle repair workshops) Publisher: Verband der Automobilindustrie e.V. (VDA) D-60625 Frankfurt am Main, WestendstraBe 61