aie # M2 AROS.20-P-6015HB 1

WIS 05-6015HB

M2 a AROS.20-P-6015HB Checking camshaft timing 14.1.98

aie # M2 AROS.20-P-6015HB 1 – rysunek
aie # M2 AROS.20-P-6015HB 1 – rysunek

ENGINE 604, 605, 606

aie # M2 AROS.20-P-6015HB 1 – rysunek
aie # M2 AROS.20-P-6015HB 1 – rysunek
aie # M2 AROS.20-P-6015HB 1 – rysunek

# M2

When carrying out removal and installation work, it is sufficient if the basic position of the camshafts is checked. Only check the timing of the camshafts if it is certain that the setting of the TDC pointer is correct, if necessary

inspect setting of TDC pointer bracket, correct

[ed] (33) Removing, installing

Remove cylinder head cover

Remove viscous fan clutch

Checking

Check camshaft code numbers

aie # M2 AROS.20-P-6015HB 1 – rysunek
aie # M2 AROS.20-P-6015HB 1 – rysunek
aie # M2 AROS.20-P-6015HB 1 – rysunek

# M2 ARO5.20-P-6015HB

threaded pin into M6 hole of ay head cover attachment for this

nut (01) (part no. 102 990 01 51) onto pin. dia! gage holder (02) onto nut (01) magnetic foot removed.

Threaded pin

gage holder

ww

gage

wrench bit

valve lift of 2 mm, the reading at the damper should agree with the as in the table

Number Designation Engine 604 Engine 605 Engine 606 except except 605.960/962 606.961/962/964

BEOS.20-P-1001-01ACamshaft code numbersinlet111108
exhaust100807
Camshaft code numbersOO oe
NumberDesignationEngine 605.960/ 962Engine 606.961/ 962/964
BEO5.20-P-1001-01ACamshaft code numbersinlet1411
exhaust0807
Timingre
NumberDesignationEngine 605.910/911/912, 606.910/912
BEOS.20-P-1001-02ATiming of inlet valve/exhaust valve at 2mm valve stro ke and used timi Iming chal haininlet valveopensafterTDC closesafterBDC °CRA °CRA12 13
NumberDesignationEngine 604, 605.910/911/912, 606.910/912
BEOS.20-P-1002-02ATiming of inlet valve/exhaust valve at2 mm valve exhaust valve stroke and used timing chainopens before BDC closes before TDC°CRA °CRA25 14

Timing

NumberDesignationEngine 605.960/ 962
BEOS.20-P-1001-02ATiming of inlet valve/exhaust valve at 2mm valve stroke and used timing chaininlet valveopens after TDC°CRA °CRA12 0
BEO5.20-P-1002-02ATiming of inlet valve/exhaust valve at 2mm valve stroke and used timing chainexhaust valveopens before BDC“CRA25
closes before TDC“CRA

Timing

aie # M2 AROS.20-P-6015HB 1 – rysunek
DesignationEngine 606.961/ 962/964
Timing of inlet valve/exhaust valve at 2mm valve__iniet valveopens after TDC°CRA12
stroke and used timing chaincloses after BDCCcRA0
inlet at2n Timing of valve/exhaust valve mm valve stroke and used timing chainvalve exhaust7 before opens BDC closes before TDC°CRA °CRA25 14
aie # M2 AROS.20-P-6015HB 1 – rysunek
aie # M2 AROS.20-P-6015HB 1 – rysunek
aie # M2 AROS.20-P-6015HB 1 – rysunek
aie # M2 AROS.20-P-6015HB 1 – rysunek

\ 116589013400 \ 001589532100 J (363589022100 J \ 001589650900 —_/

Threaded pin Dial gage Dial gage holder Socket wrench bit