Removing and installing, replacing oxidation catalytic converter or

WIS 49-5531

front exhaust system

Removing and installing, replacing oxidation catalytic converter or – rysunek

Operation no. of operation texts and work units or standard texts and flat rates:

P49-5088-

Shown on engine 605.911 A Sedan 8 = Station Wagon

oti §=RA 49,1621-5531/1

Flanged joint at oxidation catalytic converter (158) detach, attach. To do this, unscrew bolts, screw or at front exhaust systern (157) in. Tightening torque 20 Nm as reference value. Center and tail muffler»… ………..00. . pull out, insert. Seal (2/2) 2. ee ee eee check suitability for re-use, replace if necessary. Flanged joints of exhaust manifold-oxidation catalytic converter (158) or exhaust manifold-front separate, connect. To do this, unscrew bolts, exhaust system (157) screw in. Tightening torque 20 Nm as reference value. Bolts on support (159) 2… ee ee ee eee slacken, tighten. Tightening torque 20 Nm as reference value. Supporting bow (159/2) with dished washers take off, fit on. Replace self-locking nuts. (159/1) and self-locking nuts ………….4. Tightening torque 7 Nm as reference value. Oxidation catalytic converter (158) or front exhaust take off, insert; replace if necessary. system (157)

Note Clean all connection points if necessary with emery cloth to remove combustion and corrosion residues.

Leaktightness of all connection points check with engine running.

Note Disposing of oxidation catalytic converters Oxidation catalytic converters must not be disposed of as scrap. The oxidation catalytic converter contains valuable precious metal which can be recycled in the production process.

Refer to the publication

„Parts and Accessories Information”

for details regarding return addresses and exchange prices.

stitige = RA 49,1621-5591/2