01—490 Cylinder head and camshaft housing illustrated table     1 Filler plug 30 2 3 bolts M 8 x 55 31 3 3 seals C 8×13 32 4 Valve cover 33 5 Capped nuts…

    01-472 Facing camshaft housing Facing camshaft housing Data   Total height of new camshaft housing 104.8-105.0 Min. height after machining 104.0 Permissible deviation from parallel between upper and lower parting surface in longitudinal direction 0.1…

    01—471 Association camshaft housing and camshafts   Note   Exchange engines are in part supplied with camshaft bearing intermediate stages and repair stages. In the event of repairs, install pertinent camshafts with re­duced bearing dia.…

    01—418 Facing cylinder head mating surface   Data   Total cylinder head height 93.9-94.0   Min. height after machining 93.1   Permissible unevenness of mating surfaces in longitudinal direction 0.08   in cross direction 0.0…

    01—416 Cylinder head measuring sensor box   Note   The measuring sensor box must be equipped to agree with the engine version. Note screwed depth and use seals of sufficient thick­ness.   1054-7443   Measuring…

    01—415 Removal and installation of cylinder head   Timing at 2 mm valve lift Engine 110            Engine 110            Engine 110 California 1974       …

    01-310 Complete removal and installation of oil pan   Oil capacity in liters   Oil dipstick color code wine red, pink brown1) yellow-green   Oil pan 5.5   Oil filter 0.5   Model 107, 114,…

    01—220 Installation and centering of intermediate flange   Data   Radial runout of intermediate flange max. 0.10   Permissible axial runout of intermediate flange when mounted in crankshaft bearing basic bore during one full turn.…