Checking maximum speed at no-load
07.1—105 Checking maximum speed at no-load Test value Maximum speed at no-load (end of control range) 4900-5200/min Conventional tester Digital tester e.g. Bosch, MOT 001.03 Checking 1 …
Adjustment of idle speed and idle speed adjuster
07.1—100 Adjustment of idle speed and idle speed adjuster Job no. of flat rates or standard texts and flat rates data 07—2053. Testing and adjusting values (us* Standard version and Model…
Operation engine-transmission-overload protection
07.1—015 Operation engine-transmission-overload protection Engine-transmission overload protection To prevent damage to engine and transmission in the event of faulty operation or during extreme situations the engine-transmission overload protection performs 3 functions: 1. Engine overload…
Operation injection pump with governor
07.1—010 Operation injection pump with governor Layout of injection pump The layout of the injection pump is essentially the same as that of the M injection pump. On the other hand, the element…
Survey model – engine – injection pump
07.1—001 Survey model — engine — injection pump Model Engine Injection pump Bosch designation Governor Bosch designation Delivery pump Bosch designation Test values1) MB-sheet edition Standard version up to 1980 123.193 617.952…
Removal and installation of guide wheel
05—440 Removal and installation of guide wheel Tightening torques Nm Nuts for cylinder head cover 15 Necked-down screw for camshaft sprocket 80 Closing plug for chain tensioner 90 Pressure oil pump on cylinder head…
Removal and installation of intermediate sprocket shaft
05—412 Removal and installation of intermediate sprocket shaft Tightening torques Nm Nuts for cylinder head cover 15 Necked-down screw for camshaft sprocket 80 Fastening screw for injection timer 40 Coupling…
Removal and installation of slide rails
05—340 Removal and installation of slide rails Tightening torques Nm Nuts for cylinder head cover 15 Necked-down screw for camshaft sprocket 80 Fastening screw for injection timer 40 Closing plug for chain tensioner 90…
Removal and installation of tensioning rail
05-330 Removal and installation of tensioning rail Tightening torques Nuts for cylinder head cover Closing plug for chain tensioner Necked-down screw for camshaft sprocket Special tools Impact puller for bearing bolt (basic unit) Threaded…
Renewing timing chain
05—320 Renewing timing chain Tightening torques Nuts for cylinder head cover Closing plug for chain tensioner Special tool Socket 27 mm, 1/2″ square, for rotating engine Nm 15 90 001 589 65 09 00…