Mechanical gazoline injection system CIS
Operation
07.3-500 Operation A. Decel shutoff General During deceleration, the switchover valve located in vacuum line between intake manifold and decel shut-off valve is activated by means of a microswitch and switched to…
Subsequent installation of separate check valve on fuel pump
07.3—283 Subsequent installation of separate check valve on fuel pump Note In the event of a complaint concerning “Engine fires poorly when warm” an internal leak of fuel pump shows up, a check…
Conversion of fuel pump assembly
07.3—282 Conversion of fuel pump assembly A. General Since February 1979 the pressure reservoir (14) is connected in front of fuel filter, and an additional pressure compensating valve (27) is also installed. As a…
Replacement of holder for fuel pump, fuel filter and fuel reservoir
07.3—281 Replacement of holder for fuel pump, fuel filter and fuel reservoir For renewing holder, remove fuel reservoir (07.3-270), fuel filter (07.3-275), fuel pump (07.3-280). Note Holder has been modified to improve installation…
Removal and installation of fuel pump
07.3—280 Removal and installation of fuel pump Special tools Clamp for hose lines 000 589 40 37 00 Note The fuel pump is provided with a special coating on roller running surface,…
Removal and installation of fuel filter
07.3-275 Removal and installation of fuel filter Special tool Clamp for hose lines 000 589 40 37 00 Note The fuel filter is especially provided with an integrated damper for silencing.…
Removal and installation of fuel reservoir
07.3—270 Removal and installation of fuel reservoir Special tool Clamp for fuel hose 000 589 40 37 00 Removal 1 Unscrew protective case. 2 Pinch fuel intake hose (arrow) with a clamp.…
Replacement, centering and zero position of air flow sensor plate
07.3—245 Replacement, centering and zero position of air flow sensor plate Tightening torque Nm Hex. screw 5.0-5.5 Special tool Torque wrench 1/4″ square, 4—16 Nm 000 589 67 21 00 …
Subsequent installation of safety switch on air flow sensor
07.3—242 Subsequent installation of safety switch on air flow sensor When installing a new engine or an exchange engine without safety switch (19) on air flow sensor and distributor rotor with rpm limitation in…
Removal and installation of throttle valve housing
07.3—230 Removal and installation of throttle valve housing Note Connection (arrow) for ignition retard on throttle valve housing is no longer installed. 1074-938811 A Former version B Present version To…