Removal and installation of fuel filter

Clamp for hose lines

000 589 40 37 00

The fuel filter is especially provided with an integrated damper for silencing. To prevent contact corrosion, the fuel filter is provided with a plastic sleeve.

When exchanging fuel filter, make sure that the plastic sleeve is installed between fuel filter and mounting bracket. Also make sure that sleeve projects on both sides of bracket, since direct con­tact of fuel filter with bracket may result in contact corrosion.

1 Unscrew protective case.

2 Pinch fuel suction hose (1) with a clamp.

3   Unscrew fuel line and fuel hose from fuel filter.

4   Loosen both fastening screws (arrow) and remove fuel filter.

1st version

07.3.2 lla-275/1

F 2

2nd version

3rd version

5   For installation proceed vice versa, using new sealing rings.

6   Locate fuel filter with plastic sleeve in holder. Plastic sleeve should project on both sides of holder, since direct contact of fuel filter with holder may lead to contact corrosion.

7 Remove clamp on fuel suction hose.

8 Run engine and check for leaks.

9 Mount protective case.

07.3.2 Ila-275/2 F2

07.3.2 lla-275/3 F2

07.3.2 lla-275/4 F2