14—455 Renewing intake manifold (intake manifold removed)   Renewing   1    Remove and install intake manifold (09—400). 2   Remove and install mixture controller with air guide housing (07.3-230). 3   Unscrew all unscrewable parts on…

    14-450 Removal and installation of intake manifold, replacement of gasket   Note   When removing and installing intake manifold, the mixture controller with air guide housing need not be removed.   Layout and shape of…

    14—300 Removal and installation of anti-backfire valve   Federal and California version model year 1977/78/79   Removal 1    Pull blue/purple vacuum line from anti-backfire valve. 2    Set hose clamps (arrows) back for approx.…

    14-250 Removal and installation of air pump   Federal and California version model year 1977/78/79   Removal 1    Loosen fastening screw (1) and screw out. 2   Swivel air pump inwards and remove V-belt.  …

    14-200 Removal and installation of catalyst   Model year 1977/78/79 A. Federal version   Removal 1 Loosen nuts of flange connections on exhaust manifold and unscrew.   2 Remove heat shields.   14.2-200/1 USA 1977/78/79…

    14—100 Test program   Model year 1977/78/79   A. Federal version, tourist vehicles Federal version   For complaints such as: Poor warming-up characteristics of engine, poor idle speed, engine not accelerating or splashing during acceleration,…

    14-050 Operation   Federal and California version model year 1977/78/79 A. General   Information plate   Federal version basic color black California version basic color yellow Federal version high altitudes basic color red    …

    14—001 Functional characteristics   The various emission control systems of USA version vehicles are identified by respective information plates (arrows 1, 2 and 3). The respective plate shows the identification data, as well as all…