01—130 Knocking-out and inserting steel balls for main oil ducts   Tightening torques Nm   Fastening bolts for intermediate flange 65 Closing plug for main oil duct 40 Pressure relief valve in main oil…

    01—110 Checking, drilling and honing cylinder bores   Data         Group number1)   0 1 2 Standard dimension 86.0 piston dia. cylinder dia. 85.970-85.982 85.998-86.008 85.980-85.992 86.008-86.018 85.990-86.002 86.019-86.028 Repair stage 1…

    01—040 Engine vent — Description of function   A. Engine with vent valve This engine has a closed crankcase vent system which does not require maintenance. Engine with electronic fuel injection system.   Engine with…

01-030 Removal and installation of engine (oil filling capacity)   Specified viscosity classes according to SAE during constant outside temperatures   Oil filling capacity in liters (for approved engine oil grades refer to specifications for service products)…

01—025 Measuring oil consumption   Special tools   Oil dipstick with millimeter scale for engines with oil suction 11004-7663 115 589 15 21 00   Oil dipstick with millimeter scale for engines without oil suction 110 589…

  Conventional tool   Cylinder illuminating lamp e.g. made by Karl Storz GmbH, 7200 Tuttlingen Motoskop TW (cold light) with lens attach­ment 210 mm long.   Note   Visual inspections can be made with a cylinder illumi­nating…

01—015 Checking cylinders for leaks   Data   Total pressure loss On valves and cylinder head gasket On piston and piston rings max 25% max 10% max 20%   Special tool       Socket 27 mm…

  01—010 Checking compression   Test values in bar for engine at operating temperature   Engine Compression Compression ratio                 normal t : 1 Min. Compression Max. difference between separate cylinders…

SILNIK MODEL NAZWA HANDLOWA kW/ rpm/min 110.9211 114.060 280 118/5500 110.9211 114.073 280 C 118/5500 110.9221 116.020 280 S 118/5500 110.923 123.030 280 115/5500 110.923 NV 123.030 280 105/5500 110.923 123.050 280 C 115/5500 110.923 NV 123.050…