Removal and installation of fuel tank
47—700 Removal and installation of fuel tank Filling capacities in liters Model 107 116 123.03/05 123.09 126 Full readout approx. 85 approx. 96 approx. 80 approx. 70 approx. 90…
Lubrication of regulating linkage and regulating shafts
30—335 Lubrication of regulating linkage and regulating shafts Following each car wash and preservation of engine compartment, lubricate all bearing points of all regulating shafts, regulating levers, joints of regulating linkage and cable controls…
Removal and installation of accelerator pedal
30—330 Removal and installation of accelerator pedal A. Models 107, 116, 123 Removal 1 Compress expanding clip (arrow) behind accelerator pedal and pull out. Installation 2 During installation, make sure that…
Removal, installation and adjustment of chassis regulating shaft
30—320 Removal, installation and adjustment of chassis regulating shaft A. Model 107 Adjusting value in mm Length of pushrod (5) 105 Note Since February 1981, pushrod (5) is mounted with a…
Removal and installation of engine longitudinal regulating shaft
30-310 Removal and installation of engine longitudinal regulating shaft Removal 1 Disconnect regulating rod (5). 2 Remove lock (1) and remove longitudinal regulating shaft toward the rear. Installation 3 For installation…
Adjustment of regulating linkage
30-300 Adjustment of regulating linkage A. Lefthand steering models 107, 116, 123, 126 Righthand steering models 107, 116, 126 Adjusting values in mm Model 107 116 123 126 Length of connecting rod…
Removal and installation of engine shock absorber
22—240 Removal and installation of engine shock absorber Model 107, engine shock absorber left and right 1 For removing righthand engine shock absorber, remove expansion tank. 2 For removing lefthand engine shock absorber,…
Removal and installation of rear engine mount
22—212 Removal and installation of rear engine mount Model 107 Attention! For removal of engine mount (4) do not unscrew closing plate (10 or 12). Attach engine mount free of tension to closing…
Removal and installation of front engine mount
22—211 Removal and installation of front engine mount Model 107 1 Unscrew screw (11). 2 Turn holder (10) and shielding plate (13) away in lateral direction. 3 Unscrew engine mount (19) from…
Testing radiator or expansion tank closing cap
20—430 Testing radiator or expansion tank closing cap Radiator or expansion tank closing cap Pressure relief valve opens at new cap 1.0 ^.q’]^ bar 9au9e pressure used cap 1.0—0.2 bar gauge pressure Vacuum…