Removal and installation of front engine mount

1    Unscrew screw (11).

2   Turn holder (10) and shielding plate (13) away in lateral direction.

3   Unscrew engine mount (19) from cross member.

4    Lift engine with pit lift at oil pan.

Note: Use wooden block to prevent damaging oil pan.

5    Remove engine mount together with shim (20).

6   For installation proceed vice versa.

7   Tighten screw (11) to 75 Nm.

Check regulating linkage for function.

1    Nut

2   Cup spring 30 mm dia.

3    Rubber buffer 26 mm dia.

4   Cup spring 26 mm dia.

5    Holder

6   Cup spring 32 mm dia.

7    Engine shock absorber

8    Cup spring 26 mm dia.

9    Rubber buffer 22 mm dia.

10    Holder

11    Screw M 12 x 65

12   Spring washer

13   Shielding plate

14    Nut M 10 (7 each)

15   Screw M 10×65 (1 each)

16   Washer A 10.5 (6 each)

17    Engine carrier

18    Combination screw M 8 x 18

19    Engine mount

20   Shim

22.2-211/1 F3

1    Unscrew screw (1).

2    Lift engine with pit lift at oil pan.

Note: Use wooden block to prevent damaging oil pan.

3    Unscrew screws from engine carrier and remove engine mount with shim.

4    For installation proceed vice versa.

5    Tighten screw (1) to 75 Nm.

1    Screw M 12 x 55

2    Spring washer B 12

3   Shielding plate (right)

4    Nut M 10

5   Washer A 10.5

6    Engine carrier

7    Combination screw M 8 x 18

8    Engine mount

9    Shim

22.2-211/2 F3

1    Unscrew screw (11, arrow) from underside of ve­hicle.

2   Unscrew nut (12) below on engine shock absorber.

3    Lift engine with pit lift at oil pan.

Note: Use wooden block to prevent damaging oil pan.

4    Unscrew screws (8) and remove engine mount (9).

5   For installation proceed vice versa.

6   Tighten screw (11) to 75 Nm.

1    Screw

2   Spring washer

3   Shielding plate (right)

4   Engine carrier

5   Washer A 10.5 (6 each)

6   Screw M 10 x 65 (1 each)

7    Nut M 10 (7 each)

8   Combination screw M 8 x 18

9    Engine mount

10   Snap ring 12

11    Screw M 12×40

12    NutM6

13   Cup spring 30 mm dia.

14   Rubber buffer 26 mm dia.

15   Engine shock absorber

16   Cup spring 26 mm dia.

17    Rubber buffer 22 mm dia.

18    Holder

22.2-211/3 F3

1    Unscrew screw (11, arrow) from underside of vehicle.

2   Unscrew nut below on engine shock absorber.

3    Lift engine with pit lift at oil pan.

Note: Use wooden block to prevent damaging oil pan.

4   Unscrew screws (8) and remove engine mount.

5    For installation proceed vice versa.

Note: Engine mounts left and right are different. The shielding plate is located at the right.

6   Tighten screw (11) to 75 Nm.

1    NutM6

2   Cup spring 44 mm dia.

3    Rubber buffer 36 mm dia.

4   Engine carrier

5   Washer A 10.5 (6 each)

6   Nut M 10 (8 each)

7   Shielding plate

8   Combination screw M 8 x 18

9   Engine mount 123 241 10 13 (right) Engine mount 123 241 12 13 (left)

10   Snap ring 12

11    Screw M 12 x 35

12   Engine shock absorber

13   Cup spring 30 mm dia.

14    Rubber buffer 27 mm dia.

15   Holder

22.2-211/4 F3

1    Unscrew screw (15, arrow) from underside of vehicle.

2    Unscrew nut (1) below on engine shock absorber.

3    Lift engine with pit lift at oil pan.

Note: Use wooden block to prevent damaging oil pan.

4    Unscrew screws (13) and remove engine mount.

5    For installation proceed vice versa.

Note: The shielding plate is located at the left.

6   Tighten screw (15, arrow) to 70 Nm.

1    Nut M 6

2    Cup spring

3    Rubber buffer

4    Engine carrier

5    Engine shock absorber

6   Cup spring

7    Rubber buffer

8    Holder

9   Washer

10   Screw

11    Nut

12   Shielding plate

13   Combination screw

14    Engine mount

15   Screw

22.2-211/5 F3