Engine removal and installation, ventilation, crankcase

  1. Engine and model survey
  2. Engine and model survey (continued)
  3. Testing compression pressure
  4. Cranking engine with s starter
  5. 01-01 20 Cranking engine at front of crankshaft
  6. Testing cylinders for leaks
  7. Preceding work: Operation no. of operation texts and work units or standard texts
  8. Femoving and installing engine
  9. Disconnecting and connecting engine wiring harness
  10. Function description of crankcase ventilation
  11. Removing and Installing engine air admission housing
  12. Oil drain pipe in bottom of crankcase, arrangement
  13. Removing and installing cylinder head cover
  14. Notes regarding crankcase
  15. Dimensions for pressing in straight pins in crankcase
  16. Dimensions for pressing in straight pins in crankcase (continued)
  17. Facing contact surface of crankcase
  18. Repairing threaded bores for cylinder head bolts
  19. Cleaning, sealing main oil galleries
  20. Replacing core plugs in crankcase
  21. 01-2 100 Removing and installing timing case cover
  22. Removing and installing front cover at top
  23. Replacing racial shaft seal in front cover at top
  24. Removing and installing end cover
  25. Checking for leaks at rear of engine
  26. Preceding work: Operation no. of operation texts and work units or standard texts
  27. Examining, tightening cylinder head bolts
  28. Repairing spark plug threads
  29. Removing and installing cylinder head
  30. Examining, facing contact surface of cylinder head
  31. Widening camshaft bearing bores (repair size)
  32. Servicing threads for camshaft bearing cap bolts
  33. Cleaning, se aling oil longitudinal galleries in cylinder head
  34. Preceding work: Operation no. of operation texts and work units or s