Adjusting injection timing (begin of delivery) (position indicator RIV method) following checkup

07.1—116 Adjusting injection timing (begin of delivery) (position indicator RIV method) following checkup

Job no. of flat rates or standard texts and flat rates data 07—8300.

Check begin of delivery prior to adjustment (07.1 — 111).

1 Mount holding bracket (01) on injection pump housing.

2 Place adjusting device (02) on cylinder head screws and holding fork (arrows).

07.1.8-116/1 F3

3 Rotat crankshaft once in direction of rotation and             \_v

set to -15° after TDC.

4 Loosen nuts on injection pump flange as well as screws (3) on supporting bracket (4).

3    Screw

4    Supporting bracket

5 Adjust begin of delivery by turning hex. head screw (arrow) (-15° after TDC).

Toward engine = advances begin of delivery Away from engine = retards begin of delivery

6 Tighten nuts and screw for injection pump and check preset value.

7   Run engine and check for leaks.

8   Check oil level and correct, if required.

07.1.8-116/2 F3