Static balancing of balancing disc

Mounting mandrel for balancing disc

617 589 02 63 00

Rotating fixture

e.g. made by Trebel, D-4030 Ratingen type EO

The state of balance of the old balancing disc must be transferred to the new balancing disc.

Whenever possible, a broken balancing disc should be glued together with all its parts and should be stati­cally balanced together with the new balancing disc.

1    Place new balancing disc on balancing mandrel offset by 180° in relation to old balancing disc.

2    Let balancing mandrel with both balancing discs swing to a stop on rotating fixture.

03.8-344/1

3 Drill into new balancing disc until the discs will come to a stop on rotating fixture in any position without swinging back and forth.

Pay attention to location of balancing holes (Fig.).

Hole depth max. 15 mm.

03,8-344/2