Removal and installation of intake pipeRemoval and installation of intake pipe
|
|
|||
|
09—415 Removal and installation of intake pipe
|
|||
|
|
|||
|
Removal
|
 |
||
|
1 Partially drain coolant.
2 Remove air filter.
3 Remove carburetor (07.2-194).
4 Disconnect engine longitudinal regulating shaft and regulating rods.
5 Loosen all connections on intake pipe.
6 Loosen intake pipe fastening nuts or screws and remove intake pipe.
|
|||
|
|
|||
|
Installation
|
|||
|
|
|||
|
Install intake pipe in vice versa sequence as follows:
|
|||
|
|
|||
|
7 Install new intake pipe flange gasket.
8 Add coolant and check cooling system for leaks.
9 Adjust idle speed, while checking intake system for leaks (07.2-100).
|
|||
|
|
|||
|
09.2 ib-415/1
|
|||
|
|
|||