Removal and installation of accelerator pedal
|
|
|||
|
07.2—330 Removal and installation of accelerator pedal
|
|||
|
|
|||
|
Self-made tool
|
|||
|
|
|||
|
Remover for accelerator pedal
|
 |
||
|
|
|||
|
Version 1 Removal
|
 |
||
|
1 Remove accelerator pedal (51) from bearing plate (54). For this purpose, disengage clip from bearing plate by means of remover. Be sure to use remover, so that clip (53) is not damaged or excessively stretched.
|
|||
|
|
|||
|
Fastening accelerator pedal with push-type clip
|
5? 30/6134
|
||
|
|
|||
|
2 Pull off accelerator pedal (51) in upward direction and out of accelerator lever (49).
|
 |
||
|
Installation
|
|||
|
3 Slip accelerator pedal (51) with joint (52) into accelerator lever (49) and push tightly on bearing plate so that clip (53) is reliably engaging.
|
|||
|
|
|||
|
07.2.2 lb-330/1
|
|||
|
|
|||
|
|
|||
|
Version 2 Removal
1 Compress clip (arrow) behind accelerator pedal and pull out.
|
 |
||
|
Fastening accelerator pedal with spreader-type clip
|
|||
|
|
|||
|
Installation
|
|||
|
|
|||
|
2 During installation, make sure that clip is reliably engaging.
|
|||
|
|
|||
|
07.2.2 lb-330/2
|
|||
|
|
|||