Functional characteristics

The various emission control systems of USA version vehicles are identified by respective information plates (arrows 1, 2 and 3).

The respective plate shows the identification data, as well as all the important engine adjusting data.

14.2-001/1 USA F2

1. Information plate on cross-member in front of radiator

– VEHICLE EMISSION CONTROL INFORMATION DAIMLER-BENZ AG. STUTTGART-UNTERTUERKHEIM s^Z

Q^) DISPLACEMENT 167.5 CU. IN. ENGINE FAMILY: 78/2B/L6E/28 APPROVED MB EMISSION CONTROL SYSTEM FI/E6R/AIS0/0BC ^2 THIS VEHICLE IS CERTIFIED FOR BOTH LOW AND HIGH ALTITUDE LOCATIONS IDLE RPM 800 IIMINS: TDC AT IDLE. (VACUUM CONNECTED) CO-SET                   ~

(MEASURED AT EXHAUST MANIFOLD TAP CTL 13 DISCONNECT EXHAUST HOSE TO EGR TRANSDUCER) 0 4 2 0% (AIR INJECTION DISCONNECTED

TRANSMISSION IN NEUTRAL ACCESSORIES NOT IN OPERATION OIL TEMP 80° C. IN ADDITION SEE WORKSHOP MANUALS).

VALVf liSH AT WATER TfMP BELOW 30°C INTAKE 010 mm EXHAUST 0 25 mm VALVE LASH AT WATER TEMP ABOVE 45 °C INTAKE 0.15 mm EXHAUST 0 30 mm THIS VEHICLE CONFORMS TO U S E P A REGULATIONS APPLICABLE TO 1918 MODEL YEAR NEW MOTOR VEHICLES IT ALSO CONFORMS TO CALIFORNIA REGULATIONS APPLICABLE TO 19/8 MOOEL TEAR NEW MOTOR VEHICLES THE VEHICLE ALSO CONFORMS TO APPLICABLE CANADIAN EMISSION STANDARDS

v,_______………..                      _____________________………____mj…………….._|M[…..                                             ,,_____|M ____LJ_____r______________________^________                   …..                     .                                                                           ..„.■■                  -*

Recognising catalyst from color of information plate

Basic color/lettering

2. Information plate on door post of driver’s door

This plate shows whether vehicle is provided with or without catalyst (s).

14.2-001/2 USA F2

This vehicle is provided with catalyst(s).

This vehicle is not provided with catalyst(s) by manufacturer.

Catalyst(s) must be installed following import into USA.

This plate shows the vacuum line layout for all emis­sion system components in engine compartment.

Model year 1980