Removal and installation of fuel reservoir
|
|
|||||
|
07.3—270 Removal and installation of fuel reservoir
|
|||||
|
|
|||||
|
Special tool
|
|||||
|
|
|||||
|
Clamp for fuel hose
|
 |
000 589 40 37 00
|
|||
|
|
|||||
|
Removal
|
 |
||||
|
1 Unscrew protective case.
|
|||||
|
2 Pinch fuel intake hose (arrow) with a clamp.
|
|||||
|
|
|||||
|
1st version
3 Pinch fuel feed hose.
4 Unscrew both fuel hoses on fuel reservoir, also pinch leak hose, loosen and pull off.
5 Loosen fastening screws (arrow) for clamp and remove fuel reservoir.
6 For installation proceed vice versa. Pay attention to correct connection of fuel hoses, fasten fuel feed hose to center connection of fuel reservoir.
|
 |
||||
|
|
|||||
|
07.3.2 Ma—270/1
|
F 2
|
||||
|
|
|||||
|
|
||||
|
2 Fuel feed line
4 Mounting bracket
5 Anti-vibration buffer
6 Holder
7 Snap ring
8 Nut
9 Hollow screw
10 Sealing ring
11 Fuel hose 1 2 Fuel hose
13 Hose clamp
14 Fuel reservoir
15 Holder
16 Nut
17 Screw
18 Protective case
19 Fuel hose
20 Fuel hose
21 Fuel filter
22 Fuel pump
23 Fuel hose
24 Damper
|
 |
|||
|
|
||||
|
2nd version
7 Unscrew fuel line on fuel reservoir, also pinch leak hose, loosen and pull off.
8 Loosen fastening screw (arrow) for clamp and remove fuel reservoir.
|
 |
|||
|
Installation
|
||||
|
9 For installation proceed vice versa.
|
||||
|
|
||||
|
10 Remove clamp on fuel suction hose.
11 Run engine and check for leaks.
12 Mount protective case.
Note: On model 126, measure distance between fuel reservoir and body floor as shown in Fig.
Nominal dimension = 62 mm.
If required, push fuel reservoir in upward direction. For this purpose, apply manual counterhold against fuel pump.
|
 |
|||
|
07.3.2 Ila-270/2 F2
|
||||
|
|
||||
|
|
||||
 |
||||
|
|
||||
|
2 Fuel feed line
4 Mounting bracket
5 Anti-vibration buffer
6 Holder
7 Snap ring
8 Nut
9 Hollow screw 10 Sealing ring
12 Fuel hose
13 Hose clamp
14 Fuel reservoir
15 Holder
16 Nut
17 Screw
|
18 Protective case
19 Fuel hose
21 Fuel filter
22 Fuel pump
23 Fuel hose
24 Damper 1st version
24a Diaphragm damper 2nd version
25 Plastic sleeve
26 Plastic sleeve
27 Check valve
28 Cap nut
29 Steel line
30 Hose clamp
|
|||
|
|
||||
|
07.3.2 lla-270/3
|
F 2
|
|||
|
|
||||