Engine removal and installation, ventilation, crankcase
- GF00.10-P-0025A Models and assembly survey 9.10.96
- Removal and installation of noise capsule part at bottom of engine
- Checking cylinders for leaks
- Illuminating cylinder
- Crankcase ventilation — Function
- Knocking out and Inserting steel balls in main oil duct
- Replacement of core hole plug caps in crankcase
- Modifications to timing case cover
- Removal and installation of end cap
- Design differences and modifications to oil pans
- Repair notes for cylinder heads and cylinder head gaskets
- Refinishing precombustion chamber sealing surface
- Modifications to precombustion chambers
- Removal and installation of precombustion chambers
- Facing cylinder head contact face
- Pressure-testing cylinder head
- ARO01.00-P-1200HW Testing compression pressure 18.11.97
- ARO1.10-P-2400HX Removing, installing engine 6.10.97
- arot .10-P-2400HY Removing, installing engine
- ARO1.30-P-5800HX Removing, installing cylinder head |s.10.97
- ARO1.45-P-7500HA Removing, installing oil sump 2.4.93
- AR01.45-P-7500HX Removing and installing oil pan
- ARO1.45-P-7500HY Removing and installing oil pan |27.10.97
- ARO1.45-P-7500HZ Removing and installing oil pan |27.10.97
- ARO1.40-P-8000HX Removing, installing timing case cover [15.10.97
- ARO1.40-P-9133AW Machining crankcase contact surface {16.1 0.97
- AR01.40-P-9202AW Measuring cylinder bores 16.10.97
- ARO1.40-P-9271AW Widening cylinder bore in crankcase 3.11.97
- ARO1.40-P-9272AW Removing cylinder liner |a.11.97
- ARO1.40-P-9273AW Installing cylinder liner 3.11.97
- aR01.40-P-9291AW Machining and polishing the cylinders 25.11.97