Testing electronic idle speed control
WIS 07.1-2006
Preceding work: Operation no. of operation texts and work units or standard texts Testing, adjusting idle speed (07-2053). and flat rates: 07-2006
Engine 603.96 Standard without test coupling (X92 or X11/4)
Overvoltage protection relay (K1 or K1/1) and FUSE eee eee eee eee test. Measure voltage between contacts 9 and 11 of control unit coupling. Specification approx. 12 V. Double coupling of actuator (Y22)) unplug and plug in again (at least for 3 s), engine speed increases briefly. Engine speed sensor (L3) at coupling (L3x) ….. test. Resistance 0.4–2.5 kQ, engine idling voltage >4V~. Coolant temperature sensor (B11/1) ………. test. Specification: 20° C, 2.2–2.8 kQ.
otha RA 07.1.1032-2006/1
Electrical operation of actuator (Y22) test. Engine idling. Specification approx. 12 V.
e
Note For wiring diagrams see Op. No. 07.1-0400
cua = RA 07.1.1032-2006/2
Function test
comin = RA 07.1.10382-2006/3
Testing components Testing overvoltage protection relay (iK1/1)
cua RA 07.1.1032-2006/4
amin RA 07.1.1032-2006/5
Testing coolant temperature sensor (B11/1)
cain RA 07.1.1032-2006/6
Testing electrical operation of actuator
«mings RA 07.1.1092-2006/7























