Technical Modifications Engine 103 Combustion III KE Injection

WIS Tech_Mods-comb3

07.3 Mechanical/Electronic gasoline injection system (KE injection)

DesignationNature and reason for modificationProduction breakpointOp. no.
Fuel pumpFuel pumps with shaped track. \dentification: Bosch production date as of 642.as of 02/8607.3-5710
Fuel pump Model 201.029Fuel pumps of a further manufacturer (except national versions G) @sd).11/90–
Mixture control unitSecuring screw for air guide housing to mixture control unit M 6X 22 screw + washer (previously M 6 X20). Improved installation security.as of 03/8607.3-1686
KE control unitFault diagnosis by measuring on/off ratio integrated in KE control unit.as of 03/8607.3-1698
KE control unitEngine 103.940/943/983/985: At low speeds the idle speed control is set to open-loop mode (constant air throughput) by processing a road speed signal in KE control unit.07/8707.3-1698
KE control unit 0Engine 103.940/942/983: Reduction in tendency to jerk by use of road speed signal in KE control unit.as of 02/8807.3-1698

wii §=RA 07.3.1132/1 TA

09 Air cleaner

DesignationNature and reason for modificationProduction breakpointOp. no.
Intake air temperature sensor (B17/2)Retrofitting for vehicles up to vehicle ident end no. 1F 004948 Model 124.090as of 02/8609-1051

TA

wim §=RA 09.1132/1

14 Intake manifold, exhaust manifold, emissions control system

DesignationNature and reason for modificationProduction breakpointOp. no.
Exhaust manifold GeExhaust manifold with emissions test connection.09/8814-3915
Exhaust manifoldShield attached to exhaust manifold cylinders 1–3 to reduce heat radiated to air pump. Exhaust manifold with additional cooling and stiffening ribs (version @) with emissions test connection).08/8914-3915
Exhaust manifoldExhaust manifold with additional cooling and stiffening ribs.10/8914-3915
Exhaust manifoldVehicles with automatic transmission: New production start of exhaust manifold with (national version 4) and without connection for emissions test, emissions control system and air injection version a) Cc or ).06/9014-3915
Exhaust manifoldCollar nut (previously nut with washer) for attaching to cylinder head.11/9014-3915
Temperature sensor coupling and wiring harness for catalytic converter warning system model 126 ®Shape of coupling modified.01/8914-0115
Intake manifold gasketAsbestos-free gasket.06/9014-1310
Intake manifoldIntake manifold attachment modified05/9014-1310

time =RA 14.1132/1 TA

Technical Modifications Engine 103 Combustion Ill

KE Injection

15 Electrical system engine (ignition system)

Designation Nature and reason for modification ProducOp. no. tion breakpoint

Crankshaft position Additional manufacturer (alternatively AB-Elektronik 01/86 and Bosch). sensor

Crankshaft position Production-related conversion because of cold soldered 03/87 sensor (Bosch) points and wire fracture as a result of corrosion.

EZ2L ignition control Increase in governed speed to 7000 + 50 rpm in 02/86 unit combination with modified camshaft, fuel pump relay and KE control unit.

EZL ignition control Model 129.060 as of vehicle end no. F057393: modified 03/92 unit software, because of starting off in 1st gear (automatic transmission)

EZL ignition control Modified ignition map because of load change jolts when 03/87 unit shifting with manual transmission.

Engine Part no.

103.94 006 545 73 32 006 545 75 32 alternatively

103.98 006 545 74 32 006 545 76 32 alternatively

Distributor rotor Production-related conversion because of arcing, 03/86 cracking and poorly machined central electrode. arm

Distributor cap Production-related conversion because of loose or 03/86 fractured carbon brushes.

May + Christe Production-related conversion because of interturn short 10/86 ignition coils circuit and cracks on dome, contact 4.

TA

ie =RA 15.1132/1

DesignationNature and reason for modificationProduc- tion break- pointOp. no.
Spark plugsApproval of spark plugs01/8715-1031
BeruBoschChampion
Normal- compression 14 K-8 DUO14 K-8 DUH8DC H8DCOS$ 10 YC S$ 10 YCC
@)G@) and low compression14K-9DU 14K-9 DUOH9DC H9DCOS$ 12 YC S 12 YCC
Reason: frequent cold start complaints for stop-and-go driving.
Coolant temperature sensor (B11/2)Conversion to 4-pin temperature sensor.08/89
Engine systems contro! unit MASSoftware revised, storage of fault code 3 eliminated.07/9015-2193

TA

wim §=RA 15.1132/2

DesignationNature and reason for modificationProduction breakpointOp. no.
Emissions contro! systemEngine 103.940/943/983/985 with automatic transmission: new start of production of exhaust recirculation, air injection and engine wiring harness.06/9014-7251
Exhaust manifold gasketAsbestos-free gasket.as of 07/9014-3915
Air injection lineAir injection line with modified connection for attaching non- return valve.10/9014-7251
Belt pulley at air pumpInstallation of spacer ring in front of the bearing in the beit pulley08/9114-7251
Exhaust gas recirculation valveDiaphragm modified in order to improve sealing09/9114-7611

TA

wtime §=RA 14.1132/2

Designationreason forProduction breakpointOp. no.
KE control unit103.940/942/981/983version): modification in of Carb-Diagnosisas of 06/8807.3-1698
KE 5 control unitmodification, thus no display when altitudes.11/8907.3-1698
KE 5 control unitmodification, discontinued07/9007.3-1698
KE control unitfor secondary air exhaust gas modified.08/9007.3-1698
Fuel pump set Mode! 124 Station Wagonholder for fuel thus positioning at correct inner ring joint of shaft.as of 07/8607.3-5710
Fuel pump set Models 124.026/030, 201.029second fuel pump formation of vapouras of 09/8607.3-5710
Fuel pump set Model 124.026/030second fuel formation ofas of 07/8707.3-0266
Fuel pump set Modet 124 Sedanin noise damping routing and longer from fuel filter to10/8807.3-5770
Injection valvesvalves.as of 06/8707.3-6520
Injection valvesvalves. on shaft 23.09/8807.3-6520
Technical Modifications Engine 103 Combustion III KE Injection – rysunek

TA

wile §=RA 07.3.1132/2

DesignationNature and reason for modificationProduction breakpointOp. no.
Fuel distributorScrew union for fuel feed and return pipe made of modified material01/9007.3-1674
Non-return valve of fuel pumpTightening torque increased to 22 Nm (previously 17 Nm)03/90
Throttle valve bodyImproved throttle valve switch. With automatic transmission and ASR in addition modified opening angle.as of 03/9007.3-6210
Fuel filterModel 124, 129, 201 (without Gs Gulf States): conversion of fuel filter to 0.4 liter (was 0.6 liter). Approval of double fuel pump (Pierburg)Model! 124: 02/93 Model 129: 06/93 Model! 201: 01/93
Fuel suction hoseModel 124 Sedan and Coupé: fuel suction hose from fuel tank to fuel pump converted to shaped hose to avoid kinking (as of vehicle ident end no. B 097367)10/8907.3-5710

TA

wile §=RA 07.3.1132/3