Technical Modifications Engine 103 Combustion Injection
WIS Tech_Mods-comb4
30 Accelerator control
| Designation | Nature and reason for modification | Production breakpoint | Op. no. |
| Fulcrum lever | Standardized shape | 01/86 | 30-1010 |
| Accelerator pedal lever, models 124, 201 | Response and variability of accelerator pedal lever im- proved by conversion (exten- sion), bearing point and full throttle stop with enlargement of pedal travel by 3° toward full throttle. | 11/88 | 30-0012 |
| Tempomat cruise control connecting rod | Shorten by 6 mm to facilitate installation. | 06/89 | 30-1010 |
| Accelerator control (ASR) | New type of position indicator, actuator and control unit for electronic accelerator pedal. | as of 06/89 | 30-1156 |
| Accelerator control (ASR) | Engine 103 with automatic transmission (except engine 103.943/985): return spring between bearing bracket and relay lever with greater spring force. | 08/89 | 30-1010 |
| Accelerator contro! (ASR) | Connecting rod between accelerator contro! lever and relay lever has standardized shape for M103 and M104. | as of 07/90 | 30-1010 |
| Tempomat cruise control | Modified rubber seal between coding connector and Tempomat control unit (colour grey, previously black). | as of 11/89 | 30-1010 |
| Relay lever | Ball stud on relay lever lengthened. | 01/91 | 30-1010 |
| Bowden cable | Models 124 and 201: bowden cable with double spiral (model 124 shortened cable length). | 01/93 | 30-3402 |
time §=RA 30.1142/1
TA
47 Fuel system
| Designation | Nature and reason for modification | Production breakpoint | Op. no. |
| Vent line model 124 Station Wagon | Vent line outlet at bottom part of fuel tank (previously top part) | 06/86 | 47-4100 |
| Splash bowl model 124 Sedan | Improved sealing by use of O- ring. Avoids misfiring. | as of 02/87 | 47-4100 |
| Fuel evaporation control system model 124 | Regeneration line routed through component compart- ment to engine compartment. | 03/87 | 47-8201 |
| Fuel evaporation control system | Regeneration thermovalve actuation: 70°C (previously 50°C). | as of 12/87 | 47-8252 |
| Fuel evaporation control system model 107 | Vent line from fuel expansion tank to vent valve shortened by 150 mm. | 03/88 | 47-8021 |
| Fuel gauge sender, model 201 | Installation position modified from 15° to 5° (difference from vertical). | 09/87 | 47-7000 |
Fuel reserve gauge To prevent the reserve warning 09/87 lamp flickering in the transition range to reserve indication, the light is actuated for about 2 minutes by an electronic circuitry when it first lights up. If the contacts again open within about 2 minutes, the reserve warning lamp goes out until the fuel level once again drops below reserve quantity.
TA
wii RA 47.1142/1
| Designation | reason for | Production breakpoint | Op. no. | |
| Fuel tank model 126.02 RHD | corrosion use of for filler neck, flanges. | as of 12/87 | 47-4100 | |
| Fuel tank model 124 Station Wagon | and support section | 01/87 (as of veh. ident end no. F 030592). | ||
| Fuel tank model 124 Station Wagon | pipe at bottom (previously top | 01/86 (as of veh. ident end no. F 014890) | ||
| Fuel tank mode! 126.02 RHD | corrosion use of for filler neck, flanges. | as of 12/87 | 47-4100 | |
| Fuel tank (55 liters) model 201 | (except o sd). | as of 03/89 | 47-4100 | |
| Activated charcoal filter model 124.026/030 | line (plastic- steel). | as of 02/88 | 47-8212 | |
| Fuel vent line mode! 124.026/030 | plastic-coated (except | (aluminium | as of 03/89 | 47-4100 |
| Guide funnel (national version Gs®) | with additional facilitate installation. | 06/89 | 47-4100 | |
| Fuel suction hose | Sedan and suction hose from pump shaped hose in kinking (as of end no. | 10/89 | ||
TA
