Technical Modifications Engine 103 Combustion! KE injection
WIS Tech_Mods-comb1
07.3 Mechanical/Electronic gasoline injection (KE injection)
| Designation | Nature and reason for modification | Production breakpoint | Op. no. | |
| Fuel pump relay | governed speed: rpm, previously rpm. Modified cold actuation: previously +15 °C. | as of 06/88 | 07.3-5792 |
Fuel pump relays relay function 07.3-5792 (N16/3, N16/4) up to approx. sensor for oxygen 12/89 heater with designation
cable assignment in Actuation as before. The connector 87H is to a bridge to 87.
as of 01/90 of bridge between 87 and 87H. electronic circuitry in Additional connector for sensor heater. sensor only heated °C coolant Cut-in controlled by temperature sensor.
| Cold start valve | connector coloured in (previously blue). | 08/88 | 07.3-2353 | |
| Cold start valve | has 1.2 amperes 3 amperes) and seal at the armature | 05/90 | 07.3-2353 | |
| Injection valves | opening pressure | bar). | 08/88 | 07.3-6500 |
wip =RA 07.3.1112/1 TA
| Designation | Nature and reason for modification | Production breakpoint | Op. no. |
| Mixture control unit | Anti-tamper lock for mixture regulating screw with steel ball (previously steel! cylinder). | as of 12/88 | 07.3~5203 |
| Fuel filter | Models 124, 129, 201 (without @sa) and Gulf states): conversion of fuel filter to 0.4 liter (was 0.6 liter). | Mod. 124: 02/93 Mod. 129: 06/93 Mod. 201: 01/93 | |
| Fuel pump | Optionally Bosch fuel pump or Pierburg double fuel pump, | Mod. 124: 02/93 Mod. 129: 06/93 Mod. 201: 01/93 | |
TA
