Replacing, adjusting throttle valve switch

WIS 07.3-1689

Replacing, adjusting throttle valve switch – rysunek
Replacing, adjusting throttle valve switch – rysunek

Operation no. of operation texts and work units or standard texts Preceding work: Removing, installing throttle valve assembly (07.3-6210). and flat rates: 07-1689.

P07-0264-534

$29/2 Commercially available tools and testers (see Workshop Equipment Manual)Throttle valve switch, full load/idle speed recognition$29/2×1Plug connection, throttle valve switch full load/idie speed recognition
Designatione.g. Make, order no.
MultimeterSun, OMM-5

Symbols for test mode with multimeter

Symbols for testers

— Multimeter Multimeter Connector Resistance mode —

time =RA 07.3.1112-1689/1

TestTest scopeOperation/Specifi-Possible cause/Remedy
stepRequirementcation
Replacing, adjusting throttle valve switch – rysunek

throttle <1 Q 1.0 Full load Throttle valve switch (S29/2) faulty, replace to full stop stop

throttle 00 slightly idle

throttle © to idle

2.0 Idle speed throttle <1Q Throttle valve switch stop (S29/2) faulty, replace to idle Turn valve (S29/2) sufficiently specificais achieved.

throttle by mm

Turn on ignition for vehicles with ASR.

Note If throttle valve switch faulty, replace throttle valve body.

wii =RA 07.3.1112-1689/2