Checking camshaft timing

WIS 05-2150

Checking camshaft timing – rysunek
Checking camshaft timing – rysunek

Preceding work: Cylinder head cover removed (01-0500). Spark plugs removed (15-1031).

POS – 5244 – 57

position so that only base circle (arrow) is Inlet cam at cylinder 1 …………….000. resting against rocker arm (5). To do this: Crankshaft 0.2.0. e eee eee ee eee rotate in direction of rotation of engine with size 27 hexagon socket and torque wrench 000 589 10 99 01. Camshaft code number check (see note). Rocker arm at inlet valve of cylinder? …….. remove (05-2230). Rocker arm (5) with ball socket (55) ………. install (see shop-made tool). Setting bolt (6) 0.0… eee eee ee turn to eliminate valve clearance. Setting bolt (6) 2.2.0.2… 0. eee eee secure with locking nut (7). Dial gauge holder (2) 136 589 04 2100 ……. fit onto cylinder head. Dial gauge (1) with tracer pin (3) ………..-. insert into dial gauge holder (2).

cue §=RA 08.1123-2150/1

Tracer pin (3) 2.2.2.0… 2c eee ee eee set on valve spring retainer (8) vertically and with a preload of 3 mm. Large pointer of dial gauge (1) ………….. set to ”0”. Crankshaft 0.2… 0.0.02. eee eee eee eee rotate in direction of rotation of engine. At a valve lift of 2 mm, the value at the vibration damper must agree with the value in the table … “inlet valve opens after TDC”. Camshaft timing ……………..-.00 00s adjust (05-2152).

Timing in °CA at 2 mm valve lift

Engine Code number of front tnlet valve Exhaust valve camshaft stamped in camshaft flange opens after closes after opens before closes before TDC BDC TOC BDC

103 auBer 18, 36?) 11.5° 17.0° 18.5° 13.5° 103.984 19′), 37′)?)

225), 424), 495) 11.5° 19.5° 21.5° 13.5° 23′)°), 43′)*), 50″)*)

103 983 AMG – 15° – 17°

103.94 only 20 16° 0.5° 19.0° 14.5° Belgium 115 kW 21′)

26.5° 18.5° 30°), 44%), 565) 6.5° 14.0° 31′)*), 45″)*), 57″),5)

103.984 53°) 16.5° 24° 21.5° 13.5° 54′)®) 1) Repair camshatt with 0.5 mm larger bearing diameter. 2) USA 1986. 3) Installed since 05/86 (M7 thread) for attaching camshaft sprocket. 4) Camshaft tin-coated, cam 1 mm wider, standard as of 10/86. 5) Chilled cast iron camshaft, as of 02/89 (driver mount 20 mm dia.). 6) 103.984 as of 03/89 (driver mount 20 mm dia).

aie =RA 05.1123-2150/2

Checking camshaft timing – rysunek

Special tools

Checking camshaft timing – rysunek

/

Shop-made tool

Rocker arm with nut welded on and setting bolt with lock nut for eliminating valve clearance.

Checking camshaft timing – rysunek

Rocker arm, engine 103 sr ONOW M10 x55 bolt M10 locking nut M10 nut welded onto rocker arm Compensating element guide sleeve Oo

Notes

When performing removal and installation Operations, it is sufficient to check the basic position (marking 20 and 21) of the camshaft (see 05-2230). Re-set timing if the difference is more than 2° crank angle (05-2152).

Checking camshaft timing – rysunek

The camshaft code number is stamped in the camshaft flange (arrow).