Adjusting camshaft timing
WIS 05-2152
Preceding work: Camshaft ming checked (05-2150). Front cover at top removed (01-2120).
Camshaft sprocket 1st version up to 10/1985 and engine 103.983 AMG
P05-5512–57
3 Locating pin in camshaft flange
4 Adjusting hole with chamfer at front, or rear for basic setting C_ Timing advanced (+ 2°, +4°, +6°, +8°) as chamfer at adjusting hole (4) al front D_ Timing retarded (- 2°, – 4°, -6°, -8°) as chamfer at adjusting hole (4) at rear (camshaft sprocket (7) turned)
Camshaft 22.0.2… 0.00 eee eee rotate into basic position (05-2230) Chain tensioner 0.0.0.0… 00 eee eee remove (05-3100) Camshaft sprocket (7) ……………000– unbolt, remove from camshaft (05-2200)
wie §=RA 05.1123-2152/1
Adjusting timing in basic setting
Camshaft sprocket (7) ……..—-.0020005 rotate until locating pin (3) engages in the hole (4) with the chamfer facing forward or to the rear Advancing timing (+ 2°, 4°, +6°, +8° crank
angle)
Camshaft sprocket (7) ……………02005 turn so that chamfer of bore (4) is facing forward Camshaft sprocket (7) ………….200000rotate with timing chain (8) fitted on until locating pin (3) engages in the corresponding hole (+2°, +4°, +6°, +8°)
Retarding timing (- 2°, -4°, -6°, -8° crank
angie)
Camshaft sprocket (7) ………..00202 00 turn so that chamfer of hole (4) is facing to the rear Camshaft sprocket (7) ………….000000rotate with timing chain (8) fitted on until locating pin (3) engages in the corresponding hole (- 2°, -4°, -6°, -8°) Chain tensioner …………….0 00 e eee install (05-3100) Camshaft timing 0. cece eee check (05-2150)
mie =RA 05.1123-2152/2
Camshaft sprocket 2nd version (as of 10/1985)
P05 – 5247 – 57
A Basic position B Camshaft timing advanced 3° C Camshaft timing retarded 3°
Camshaft 0.00220 00 eee eee rotate into basic position (05-2230). Chain tensioner ……….-.-…-0020005 remove (05-3100). unscrew, remove from camshaft (05-2200). Camshaft sprocket (7) …………–0.20065
Advancing timing by 3° crank angle (B)
Camshaft sprocket (7) …………–.–065 turn (arrow (6) rear). Camshaft sprocket (7) with timing install, hole must engage in locating pin (3). chain (8) fitted 0.0… e eee
wu =RA 05.1123-2152/3
Retarding timing by 3° crank angie (C)
Camshaft sprocket (7) (arrow (6) front) with timing chain (8) fitted …………….00.0. install, hole must engage in locating pin (3). Camshaft sprocket (7) …………-…000screw on (05-2200). Chain tensioner ……..0….20.2 000000 install (05-3100). Camshaft timing ………….0…0000000check (05-2150).





