Removing and installing driver on camshaft
WIS 05-2170
Preceding work: Operation no. of operation texts and work units or standard texts High voltage distributor removed (15-3010) and flat rates
Distributor rotor (11) 2.2… eee eee ee unscrew, screw on.
AN Pay attention to tightening torques of different versions of bolts (9); see table overleaf. Installation note: the slot (arrow) in the driver (11) must engage over the locating pin (20) in the camshaft.
ame RA 05.1123-2170/1
Special tool
Driver 3rd version ist version 2nd version as of 03/1989 up to 02/1989
Material Steel Steel Aluminium Bolt M7 torx T40 M8 x 29 M7 X 29 (internal torx) Tightening torque 16 Nm 21 Nm 16 Nm
Insertion sleeve Collar © 21.5 mm 20 mm 20 mm – 103 589 01 14 00
wie RA 05.1123-2170/2 – 103 589 01 14 00


