Cranking engine with starter
WIS 01-0110
Preceding work: Warning instructions when hood open (01-0085).
Models 107, 124, 126, 201
Ignition 2.2.0… eee ee switch off. Plug connection of crankshaft position sensor (L5) at EZL ignition control unit (N1/2) …….. unplug, plug in. Clamp (arrow) of compression pressure recorder 001 589 76 2100 ……………. clamp onto positive cable of battery (arrow). Connector of plug connection (X27) ………. unplug.
Note Model 107: The plug connection (X27) is located on the left next to the battery.
aime RA 01.1113-0110/1
Adapter cable (01) 124 589 366300 ……… connect to plug connection (X27). Adapter cable (01) ………………..0. connect to cable (02) of compression pressure recorder. Engine 02… eee cee eee crank by pressing contact handle on compression pressure recorder.
Preceding work: Warning instructions when hood open (01-0085).
Model 129
Ignition
mie RA 01.1113-0110/2
Plug connection of crankshaft position sensor (L5) at EZL ignition control unit (N1/2) 2… 2… unplug, plug in. Cover above component compartment panel …. remove, install. Connector of plug connection (X27) ………. unplug. Clamp (A) of compression pressure recorder 001 589 762100 …….2 2. ee eee connect at pin 1 of plug connection (X27). Clamp (B) of compression pressure recorder … connect to terminal block (X4/10). Engine ………… Lecce cee eens crank by pressing contact handle on compression pressure recorder.


