Testing compression pressure

WIS 01-0100

Operation no. of operation texts and work units or standard lexts and flat rates

Test data for engine at normal operating temperatureGauge pressure in bar
Minimum compression pressure atnormal compressionapprox. 12
low compressionapprox. 7.5
Permissible difference between individual! cylindersmax. 1.5

Special tool

Testing compression pressure – rysunek

cr oN

\ 001589762100 «=

1. Warm engine up to operating temperature.

Note Test compression pressure only when engine at normal operating temperature.

2 Remove spark plugs (15-1031).

Testing

3 Crank engine with starter (01-0110).

Note Crank engine several times in Neutral position and with parking brake applied in order to expel residues and soot.

am RA 01.1113-0100/1

Testing compression pressure – rysunek

4 Insert diagram sheet into the compression pressure recorder.

5 Press ceiling cone of the compression pressure recorder into the spark plug hole of cylinder 1.

6 Open throttle valve fully.

7 Rotate crankshaft about 8 revolutions with starter (01-0110).

8 Test all the cylinders in this way.

Note \f the minimum compression pressure is not reached, test cylinders for leaks (01-0150).

9 Clean spark plug recesses by blowing out with compressed air. Remove residues on the tapered ceiling seat.

10 Install spark plugs (15-1031).

cue RA 01.1113-0100/2