Oil circuit

WIS 18-0050

Oil circuit – rysunek

P18-5322–59

Oil pump with oil pressure relief valve Oil feed in holiow-drilled camshaft and camshaft Oil longitudinal galiery to oil filter Met whrd bearings Oil filter Oil longitudinal gallery in cylinder head Electrical oil pressure sensor Oil feed to camshaft lubncating tube at 4th Main oil gallery camshaft bearing

Note Oil feed to rocker arms and hydraulic valve 13 Crankcase 2nd version has an oil transverse Clearance compensating elements (12x) gallery at the front like engine 104 Camshaft lubricating tube 14 Oil gallery in hollow-drilled camshaft to camshaft 15 gD OOn Oil riser gallery to chain tensioner bearings Chain tensioner Drilling aid gallery sealed with cylinder head Oil riser gallery to cylinder head gasket Oil return lock

mite RA 18.1133-0050/1

Oil filter

Oil circuit – rysunek

5120 – 57

iB] Rubber diaphragm

Oil fitter

Oil filter bottom part

12 Spring plate naewh— Oil pressure sensor connection

13 Compression spring » Replaceable cartridge Filter element

F Non-returm vaive

Connection fitting

14 Valve holder

15 Vaive piate ODNnAS

Oil titer bypass valve

16 Valve plate carrier Compression spring

17 Compression spring Circlip

18 Gasket Spring retainer Valve cone A Feed from oil pump B Filtered oil to main oil gallery Cc Unfiltered oil to main oil gallery

Outlet lock

m Pressure plate

D Oil filter bypass valve

E Outlet lock

The bypass valve opens once the flow The spring-tensioned rubber diaphragm (11) in resistance in the replaceable cartridge exceeds the replaceable cartridge prevents unfiltered oil 2+0.3 bar, and unfiltered engine oil flows into flowing out of the replaceable cartridge when the oil circuit. the engine is switched off or when changing the filter.

wae §=RA 18.1133-0050/2

F Non-return valve

The non-return valve (16) in the replaceable cartridge prevents clean oil flowing off out of the replaceable cartridge via the bearing points when the engine is switched off.

Oil pressure relief valve

Oil circuit – rysunek

(Opening pressure 5 bar)

– 37

1 Screw plug A Pressure chamber (feed)

2 Compression spring (102.9 mm long) B Suction chamber (return)

3 Guide pin (45 mm long) c Damping chamber

4 Piston

ie =RA 18.1133-0050/3