Checking dipstick and guide tube
WIS 18-3500
Preceding work: Warning instructions when engine running (01-0085).
ORD aw P18-5194-57A
Dipstick
4 Crankcase
2 Test dipstick 120 589 06 21 00 5 Oil sump floor
3 Dipstick guide tube
Dipstick (1) ee wwe ee eee mmr renee entrees remove. Code number (arrow) on dipstick (1) ……… check according to table. Test dipstick (2) 120 589 06 21 00 with millimeter gauge facing forward cee ee eee insert as far as oil sump floor (5). Size (D) cee eee ee eee eee check according to table.
uit §=RA 18.1133-3500/1
Test data of dipstick and guide tube in mm
Model AtoB a C’) D Code on dipstick number ”)
107 22 513 591.5 595 10308
124 22 §13 591.5 595 10308
124 4MATIC 22 517 604.5 608
126 22 513 591.5 595 10308
129 18 495°) 574.5 §79%) 10308
201 22 513 591.5 595 10308 1) Measured in middle of guide tube. 2) in dipstick handle. 3) Size a was 512 up to engine 103.984–10-000 081 and 103.984–12-000 117. 4) Size D was 585, C was 580.5 up to engine 103.984–10-001887 and 103.984–12-007 425. Standard as of 06/1992.
Special tool
A Engine 103.984, mode! 129 up to 06/1992 When dealing with the complaint: oil level at dipstick too low although specified quantity of oil poured in, or oil level warning lamp does not come on until oil level has dropped below “min” marking on dipstick. Remedy: install dipstick guide tube with size (D = 579 mm). Quantity of oil then when changing oil and filter 6.5 liters.



