Replacing oil nozzle return lock

WIS 18-4150

Replacing oil nozzle return lock – rysunek
Replacing oil nozzle return lock – rysunek

Preceding work: Operation no. of operation texts and work units or standard texts Cylinder head removed (01-4150). and flat rates

P18-5006–37

Oil nozzle return lock (2) ………..2.0006. tap thread about 5 mm deep Oil nozzle return lock (2) ……..2…..2-6remove with impact extractor 116 589 20 33 00 and threaded bolt 100 589 00 34 00 New oil nozzle return lock (2) ………….. knock in with a suitable drift as far as the shoulder (arrow). Pay attention to size A; see

note. «mip = RA 18.1133-4150/1

Note:

Replacing oil nozzle return lock – rysunek

Modified oil nozzie return lock

As of 12/1986 an oil nozzle return lock with shoulder (arrow) is installed in the cylinder head. This prevents the oil migrating up. When performing repairs, install oil nozzle with shoulder (arrow).

Size A = 15.2 mm

P18-5321–13

Modified oil nozzle return lock, production breakpoint: 12/1986

Model Engine Engine end no. manual automatic transmission transmission 107.041 103.982 001013 004669 124.026 103.940 010540 016408 124.030 103.983 011367 056595 124.090

126.020 103.941 001938 006387

126.024 103.981 003344 026791 126.025

201.029 103.942 000133 000957

Special tools

Replacing oil nozzle return lock – rysunek
Replacing oil nozzle return lock – rysunek

116589203300 /

mp §=RA 18.1133-4150/2