Retrofitting coolant pump drain pipe
WIS 20-2255
Preceding work: Viscous fan coupling removed (20-3120). Poly-V-belt removed (13-3420). Belt pulley/vibration damper removed (03-3420).
P20-5404–55
Belt pulleys at coolant pump and at fan bearing bracket …………….205. remove, install (13-3450) Shock absorber of tensioning device ……… remove, install (13-3450) 1st version (coolant pump with @ 7.5 mm hole) Connection fitting (1) 2000–0 coat with adhesive Connection fitting (1) ………….-.22008- knock in with drift (shop-made tool) Drainage pipe (2) ………….–2.-020— fit on to connection fitting (1) and run between crankcase and power steering pump mounting bracket
2nd version (coolant pump 103 200 37 01 with @ 9.9 mm hole) Drainage pipe (2) …………..2. 002 ee eee coat with adhesive Loctite 648, 003 989 32 71 Drainage pipe (2) ………….2200 eee ee insert into @ 9.9 mm hole and run between crankcase and power steering pump mounting bracket
amine §=—RA 20.1133-2255/1
Shop-made tool
Insertion drift Material structural steel, eg. St.37-k
P20-5367–53
Replacement parts
Designation Part number
Repair kit @ 7.5 mm hole 103 200 20 52
Repair kit @ 9.9 mm hole 104 203 08 02
wu RA 20.1133-2255/2


