Removing and installing viscous fan clutch

WIS 20-3120

Preceding work: Warning instructions when hood open (01-0085). Fan shroud removed (20-3400).

A. Models 107, 124, 126 fan shroud without fan shroud ring

Removing and installing viscous fan clutch – rysunek

Viscous fan clutch (3) turn with hexagon socket (7) 103 589 01 09 00 and torque wrench (8) 001 589 72 21 00. Counter-holder (1) 103 58900 4000 ……… allow to engage from the rear of the belt pulley (21) into the retaining slot (20) of fan bearing bracket and at the same time into retaining hole of belt pulley.

wuite =—RA 20.1133-3120/1

Viscous fan clutch (3) with fan (2) 2… 2.2002. unscrew, remove, install (45 Nm). Viscous fan clutch (3) of fan (2) unscrew, screw on (10 Nm).

A The cast part number of the fan (2) must be positioned at the front (radiator side).

Tightening torques in Nm

Viscous fan clutch to bearing body45
Fan to viscous fan clutch10

Special tools

Removing and installing viscous fan clutch – rysunek
Removing and installing viscous fan clutch – rysunek

»

103 589 01 09 00 J

Modifications to viscous fan clutch and to

fan An improved cooling capacity is achieved by using a fan with 9 (previously 11) vanes and a modified viscous fan clutch.

wai §=RA 20.1133-3120/2

Viscous fan clutch modified, production breakpoint: 11/1987

Model Engine Engine end no. Vehicle ident end no. manual automatic transmission transmission A F 124.026 103.940 017337 037141 640984 060739 124.030 103.983 018887 097940 . * 124.050 124.090

124.226 103.943 000151 000334 . 124.230 103.985 000623 002259 . . 124.290

126.020 103.941 003051 010055 382144 *

126.024 103.981 005076 045443 . * 126.025

Not recorded

Modified hose holder

Removing and installing viscous fan clutch – rysunek
Removing and installing viscous fan clutch – rysunek

The hose holder (1, 1a) for attaching the vent hose at the fan shroud (3) has been modified.

A Previous version B_ Present version

P20-0121–13

Hose holder, production breakpoint: 02/1988 — 05/1988

Model Engine Engine end no. Vehicle ident end no. manual automatic transmission transmission A F

107.041 103.982 * . 089178 .

124.026 103.940 * . 732131 *

124.030 103.983 * . . . 124.050

124.090 103.983 * . * 065912

124.226 103.943 * .

124.230 103.985 * * * 124.290

not recorded

ui =RA 20.1133-3120/3

Modifications to attachment of viscous fan clutch to fan bearing bracket The length of the bolt for attaching the viscous fan clutch to the fan bearing bracket has been moditied from M10 X60 to M10 X45. This facilitates installation of the viscous fan clutch when changing the poly V-belt.

Length of bolt of viscous fan clutch, production breakpoint: 08/1988

Model Engine Engine end no. Vehicle ident end no. manual automatic A F transmission transmission

* * 107.041 103.982 002031 008845

124.026 103.940 023093 051714

124.030 103.983 025247 130873 124.050 124.090

124.226 103.943 000300 000679

124.230 103.985 001411 005031 124.290

126.020 103.941 003587 012094

126.024 103.981 006011 064846 126.025

201.029 103.942 011048 014816

not recorded

amie FRA 20.1133-3120/4

Preceding work: Fan shroud removed (20-3400).

B. Models 124, 126 fan shroud with fan shroud ring

Removing and installing viscous fan clutch – rysunek
Removing and installing viscous fan clutch – rysunek

P20 – 5140 – 57

Viscous fan clutch (3) ………..-….000turn with hexagon socket (7) 103 589 01 09 00 and torque wrench (8) 001 589 72 21 00. Counter-holder (1) 103 58900 4000 ……… allow to engage from the rear of the belt pulley (21) into the retaining slot (20) of fan bearing bracket and at the same time into retaining hole of belt pulley. Viscous fan clutch (3) with fan (2) ……….. unscrew, remove, install (45 Nm). Viscous fan clutch (3) of fan (2) …………. unscrew, screw on (10 Nm).

The cast part number of the fan (2) must be positioned at the front (radiator side).

amie §=RA 20.1133-3120/5

Fan to viscous fan clutch 10

Removing and installing viscous fan clutch – rysunek
Removing and installing viscous fan clutch – rysunek

Special tools

103589010900 /

Note The fan shroud has been split. This provides improved accessibility to the poly V-belt. Production breakpoint for Model 124: 12/1989 or 4/1990 Model 126: 08/1990

wae §=—RA 20.1133-3120/6

Preceding work: Warning instructions when hood open (01-0085).

C. Model 129

Removing and installing viscous fan clutch – rysunek
Removing and installing viscous fan clutch – rysunek
Removing and installing viscous fan clutch – rysunek

Locking pin (18) 2… 22.0… 2 eee ee ee eee remove, insert. Fan shroud ring (6) …….2-….2200000 eee turn to left, place over fan (2), install.

When installing, ensure the 4 catches (arrow) of the fan shroud ring (6) are correctly seated in the fan shroud.

mime = RA 20 1133-3120/7

Counter-holder (1) 120 589 020100 ……… remove, fit on. Viscous fan clutch (3) with fan (2)… unscrew with hexagon socket (7) 103 589 01 09 00 and torque wrench (8) 001 589 72 21 00, remove, install (45 Nm). Viscous fan clutch (3) of fan (2) unscrew, screw on (10 Nm).

A The cast part number of the fan (2) must be positioned at the front (radiator side).

Tightening torques in Nm

Viscous fan clutch to bearing body45
Fan to viscous clutch10

Special tools

Removing and installing viscous fan clutch – rysunek
Removing and installing viscous fan clutch – rysunek
Removing and installing viscous fan clutch – rysunek

120589020100 / \ 103589010900 _/

mime §=RA 20.1133-3120/8

Preceding work: Fan stwoud removed (20-3400).

D. Model 201

Removing and installing viscous fan clutch – rysunek
Removing and installing viscous fan clutch – rysunek

P20 – 5143 – 57

Radiator bridge (25) …………….0.000unscrew, screw on (9 Nm). Bowden cable of hood lock ……………. detach from radiator bridge (25), attach. Wrench (7) 120 589 130700 ………….. position on bolt of viscous fan clutch. Torque wrench (8) 001 589 72 21 00 with head removed (7) 22… 02.2 eee eee ee position in wrench (7) and turn viscous fan. Counter-holder (1) 103 58900 4000 ……… allow to engage from the rear of the belt pulley (21) in the retaining groove (20) of the fan bearing bracket and at the same time into the retaining hole of the belt pulley. Screw (4) of viscous fan clutch (3) ……….. slacken, tighten (45 Nm).

amie) =RA 20.1133-3120/9

Radiator 2… 20.00… eee ee eee eee push slightly forward. Wrench (7) with handle (a) turn.

Screw (4) unscrew, screw on. remove, install. Viscous fan clutch (3) with fan (2) and screw (4) Viscous fan clutch (3) of fan (2) unscrew, screw on (10 Nm).

A The cast part number of the fan (2) must be positioned at the front (radiator side).

Tightening torques in Nm

Viscous fan clutch to bearing body45
Fan to viscous fan clutch10

Special tools

Removing and installing viscous fan clutch – rysunek
Removing and installing viscous fan clutch – rysunek

Note An improved cooling capacity has been achieved by modifying the viscous fan clutch.

The fan is attached to the viscous fan clutch with M6 stud bolts and nuts (previously M6 bolts + washers).

Stud bolts at the viscous fan clutch, production breakpoint: 11/1987

EngineEngine end no.Vehicle ident end no.
manualautomatic
transmissiontransmissionA F

201.029 103.942 007451 010349 422323 445905