Cleaning cooling and heating system
WIS 20-0160
Operation no. of operation texts and work units or Standard texts Preceding work: and flat rates Coolant drained (20-0100). Cause of oil leak rectified
Heater or AC controls set to “warm” fill with a solution from a container (0.5 kg) of Cooling system alkaline cleaner part no. 001 986 21 71 and clear water
Engine warm up to operating temperature with flushing solution
Engine run for about 5 minutes with flushing solution Flushing solution drain from crankcase and radiator (20-0100) Heating system heat exchanger thoroughly flush out through the feed pipe with reduced water pressure Cooling and heating system thoroughly flush out with clear water with engine running.
A Clear flushing is successful if no solvent residues are present in the cooling and heating system, ie. the flushing water which flows out must no longer foam. Overflow tank replace (20-4540) Expansion tank replace (20-4500) if discolored by oil on inside Coolant and heating hoses inspect for effects of oil; replace if necessary Fresh coolant pour in (20-0100)
RA 20.1133-0160/1