Installing preglow time relay with modified ventilation

WIS 15-708

Note Since Septembat 1981 a preglow time relay with madified ventilation is installed for quick-start preglow system. The part number has not been changed.

Installing preglow time relay with modified ventilation – rysunek

In the modified version of the preglow time relay, ventilation proceeds via coding pin (1). The coding pin (2) is also longer as before and the 5-pole coupler has been designed in such a manner that the ventilation is covered. In the former preglow time relay ventilation proceeded through a bore in housing.

Modified preglow time relay 1 Ventilation 2 Higher coding pin

The modified preglow time relay can also be installed in vehicles prior to September 1981. In such a case, the modified 5-pole coupler must also be installed, since otherwise moisture may enter the relay.

Upon installation of the new relay, convert coupler of harness to new ventilation.

Layout of 5-pole coupler:

Installing preglow time relay with modified ventilation – rysunek

Jack 1 of coupler = Pencil element glow plug cylinder 1–2.5 black/blue Jack 2 of coupler = Pencil element glow plug cylinder 2–2.5 black/purple Jack 3 of coupler = Pencil element glow plug cylinder 3–2.5 black/red Jack 4 of coupler= Pencil element glow plug cylinder 4–2.5 black/yellow Jack 5 of coupler = Pencil element glow plug cylinder 5–2.5 black/green

5-pole coupler A Ist version B 2nd version 115 – 22336