Removal and installation of accelerator pedal

WIS 30-330

Removal and installation of accelerator pedal – rysunek

Self-made tool

edge M1:2

200 Pressing-off mandrel

Model 115.1 1st version

Removal and installation of accelerator pedal – rysunek

Removal

Remove accelerator pedal from bearing plate (14). For this purpose, unlock clip (15) from bearing plate by means of pressing-off mandrel (14a).

Removal and installation of accelerator pedal – rysunek

Pull off accelerator pedal in upward direction and pull out of pedal lever (10).

Note: Be sure to use pressing-off mandrel, so that clip on accelerator pedal is not damaged. The pressingoff mandrel is self-made according to drawing.

10 Pedal lever 13 Joint 11 Fullthrottlestop 14 Bearing plate 12 Accelerator pedal 15 Clip

Removal and installation of accelerator pedal – rysunek

Slip accelerator pedal with joint (13) into pedal lever (10) and push tightly on bearing plate (14) so that clip (15) is reliably engaging.

Model 115.1 2nd version and model 123.1

Removal

Press expanding clip together and pull out.

Installation

During installation, make sure that expanding clip is reliably engaging.