Adjustment of engine stop

WIS 00-220

Tightening torques Nm (kpm)

Nut (32) at front engine stop (reference value)Type 115.190(9)
Adjusting screw (31) at front engine stopType 123.1130(13)
(11)Type 123.140(4) —_
Adjusting screw at rear engine mountType 115.130(3)

Special tools

Torque wrench handle 20–100 Nm (2–10 kpm) – 001 589 35 21 00

Torque wrench handle 50–200 Nm (5–20 kpm) Sa – 001 589 44 21 00

Attachable ratchet, 1/2″ drive for torque wrench oy S handle x. – 001 589 42 09 00

Shop-made tool

Adjustment of engine stop – rysunek

= 114.5

wl 7

9: 161 Gauge to adjust front engine i-> stop (type 123.1) 0 S ho

A. Engine 615 in type 115.1

Note Vehicle must be standing on its wheels, ready for the road.

Adjustment of engine stop – rysunek
Adjustment of engine stop – rysunek

Front engine

Adjustment of engine stop – rysunek

1 On types 115.100/102/103/110/115, fully release 31 nut (32) at front engine stop.

2 Onall types (with the exception of types 115.105/ 107/108/114/117 with manual transmissions), fully release adjusting screw (11) at rear engine mount.

3 Move engine by slightly rocking from side to side with your hands. 4 =

4 Tighten adjusting screw (11) and nut (32) to correct 8 torque setting.

Adjustment of engine stop – rysunek

Note: Nut (32) will not accept a torque wrench.

Rear engine mount with stop

B. Type 123.1

Note Vehicle must be standing on its wheels, ready for the road.

Adjustment

Note: Types 123.105/130/132/150/190 with two engine shock absorbers do not have front engine stops.

Adjustment of engine stop – rysunek
Adjustment of engine stop – rysunek

Front engine stop

33 31

1 Turn steering to full left or right lock.

2 Lift up retainer (30) at front engine stop and swing away to one side. Fully release adjusting screw (31).

mount.

Adjustment of engine stop – rysunek

Note: In types 123.105/130/132/150/190 with manual transmissions and engine shock absorbers, the engine mount does not have a stop and therefore cannot be adjusted.

Adjustment of engine stop – rysunek

Rear engine mount with stop in models with manual tansmissions

4 Move engine by slightly rocking from side to side with your hands.

5 Position shop-made gauge (01) on front engine stop.

6 Tighten adjusting screws (31) and (11) to correct torque setting.

7 Withdraw gauge.

Adjustment of engine stop – rysunek

8 Secure adjusting screw (31) with retainer (30).

S 6 We Rear engine mount with stop in models with i 17 automatic transmissions 4 4