Adjusting governor spring of injection pump (engine 615, 616)
WIS 07.1-130
Adjusting
Unscrew governor cover and remove governor spring (13). Make sure that the governor spring (13) and the compensating washers (14) are not falling out when removing governor cover.
Putting in = speed increases Taking out = speed decreases
A compensating washer 1 mm thick increases the engine speed by approx. 120–150/min. Compensating washers are available as follows:
0.5 mm thick 1.0 mm thick 2.0 mm thick
10 Diaphragm 13. Governor spring 14 Compensating washer
