Refacing cylinder head parting surface

WIS 05-118

Data

Overall height of cylinder head84.8–85.0
Minimum height after refacing Permissible roughness of parting surfaceslengthwise crosswise84.0 0.08 0.0
Permissible parallel misalignment of upper to lower parting surfaces in lengthwise direction0.1
Peak-to-valley height0.016
Air testing pressure in water at bar positive (atu)water at bar positive (atu) / 2
Minimum distance wget ‘’a’’ and new valve seatswith new valves
Intake+0.03 to -0.43
Exhaust-0.38 to -0.78
Maximum distance “age ‘‘a’’ and refaced valve seatswith new valves
Intake Exhaust-15 A KD
Refacing cylinder head parting surface – rysunek

Refacing

Refacing cylinder head parting surface – rysunek

1 Reface cylinder head parting surface.

2 Reface valve seats until minimum distance ‘‘a’’ is segue

obtained.

3 Check timing (05—215).