Checking compression pressure

WIS 01-010

Test values with engine at operating temperature Gauge pressure in bar

Normal compression approx. 8.5 Minimum compression pressure! ) at Low compression approx. 7.5

Permissible difference between individual cylinders max. 1.5

1 Check cylinders for leaks if compression pressure is below minimum,

Checking compression pressure – rysunek

Special tool

Note Check compression pressure at operating temperature.

Check cylinders for leaks if compression pressure is below specified minimum (O0–015).

For checking, unscrew all spark plugs.

Rotating of engines

Rotate engines with starter motor. For this purpose, connect respective terminals.

Engines with electronic injection system

Connect contact handle to battery + and to starter terminal 50.

Disconnect cable 1 on ignition coil.

Checking compression pressure – rysunek

Engines with continuous injection system (CIS)

Model 116

Checking compression pressure – rysunek

Pull out fuel pump relay code No. 21 in fuse box. Connect contact handle to battery + and with the assistance of a pin to contact bushing 1 of coupling (arrow).

Model 107

Disconnect cable terminal 16 (cable color red/ violet) on 4-point cable connector. Connect contact handle to terminal 30 (cable color red) and terminal 50 (cable color violet).

Testing

Checking compression pressure – rysunek

1 Unscrew all spark plugs.

2 Rotate engine several times to throw out residue and soot (selector lever in position ‘‘N” or ‘‘P’’).

3 Push compression pressure recorder into spark plug bore of respective cylinder.

4 For testing, rotate engine for approx. 8 turns with throttle valve open.

Check all cylinders likewise. First move respective data sheet in compression pressure recorder into new working position.