Testing and adjusting firing point (breakerless transistorized ignition)
WIS 15-501
Firing point national version
Ignition Adjusting value of Test values ignition Vacuum adjustment Installation value of distributor firing point timing in direction of ignition distributor Bosch No. with vacuum without vacuum yretard’’ ,,advance”’ at starting speed at idle 1500/min 3000/min at idle at 4500/min without vacuum
G) starting 1978 Identification: Information plate on cross member in front of radiator in Japanese language.
0 237 002 024 10° before TDC 15–20° 27–32° _ 8–12° 10° before TDC
Gs 1978 Identification: Information plate on cross member in front of radiator in English language.
0 237 002 02 10° before TDC 15–20° 27–32° 8–12° 10° before TOC
Conventional tools
Revolution counter, stroboscope
Digital tester e.g. made by Bosch, MOT 001.03
Testing and adjusting
1 Measure firing point with stroboscope or digital tester at specified speed with or without vacuum.
2 Loosen ignition distributor attachment, if required, and adjust firing point by turning ignition distributor.
Screw down ignition distributor and check firing point once again.
3 Check centrifugal force and vacuum adjustment of ignition distributor. For this purpose, run through specified test values with or without vacuum adjustment.