Testing EGR (model year 1980)

WIS 14-475

Testing EGR – rysunek

Special tool

Vaccum tester – 116 589 25 21 00

Conventional tool

Revolution counter

Testing EGR – rysunek

1 Pull vacuum line from EGR valve (60), plug-on test hose and activate with vacuum. If operation of engine is not getting clearly worse, replace EGR valve.

Testing EGR – rysunek

2 Check activation of EGR valve. Pull off vacuum line at EGR valve (60) and connect to vacuum tester. Increase engine speed slowly to approx. 3000 rpm. There should be no vacuum up to approx. 1800 rpm. Vacuum connections on throttle valve housing may be mixed up.

a To thermovalve for EGR b To ignition distributor

Testing EGR – rysunek

3 Check thermovalve (37) 50 °C. Pull vacuum line white/brown/purple from EGR valve and activate with vacuum, At coolant temperatures < 50 °C no Passage on thermovalve.

Function diagram EGR

Testing EGR – rysunek
Testing EGR – rysunek

ws/br

1 Mixture controller 37 Thermovaive 50 °C Color code 12. Intake manifold 60 EGR valve br = brown 31° Exhaust manifoid a To ignition distributor rs =pink rt =red ws = white

Testing EGR – rysunek

EGR

Nut ODNODDAWN= Sealing cone Coupling nut EGR line EGR line Screw Washer Clamp Holder

10 Holder 11. Gasket 11a Asbestos gasket

12 Intake manifold

13 Stud

14 Vacuum hose

15 Contour hose 15a Contour hose

16 Vacuum line 21 + +Throttle valve housing

31 Exhaust manifold

35 Double thread connection

37 Thermovalve 50 °C

60 EGR valve

a Connection ignition distributor advance

Installation: September 1981

Engine end No. Chassis end No. Model Engine manual automatic Installation Installation transmission transmission mixed continuous

010107–011567 107.042 110.990 011569

123.007 085174–096468 096496 123.033 024 129-0244 16 123.053 110.988 start of series 024417 010064–010252 010253 123.093

126.022 02138 1–043198 043199 126.023 110.989 039922–042786 042787