Removal and installation of reactors (model year 1973)
WIS 14-200
California version model year 1974
Removal
1 Remove battery terminal positive cable.
2 Remove air filter, remove warm air hose. Completely unscrew injection line on reactors and pull air injection pipes out of reactors.
3 Loosen exhaust pipe on flange from below.
4 Drain coolant, remove water line above reactors.
5 Remove support for refrigerant compressor, while pulling electric cables from temperature switches 100 °C as well as 65 °C and coolant telethermometer.
6 Remove warm air scoop from reactor.
7 Loosen reactors and pull out in upward direction.
Installation
8 For installation proceed vice versa.
14,2–200/1 USA 1974 F2

