Removing and installing coolant temperature sensor
WIS 07.3-1687
Operation No. of operation texts and work units or standard texts and flat rates:
Pressure in coolant circuit …………..4. – release by opening cap of coolant expansion ee tank, close. Plug connection of coolant temperature sensor (X59/2) 0. ee ee eee pull off, plug in. Coolant temperature sensor (B11/2) ……… . unscrew, screw in. Seal (arrow) ……….. see eee ewe neaes replace. Coolant level ………. see eee eee check, top up if necessary.
othe §=RA 07.3.1211-1687/1 read out, erase if necessary (see Diagnosis CIS-E control unit fault memory Manual Engine, Volume 2, Index 0).
Note Stored faults which may originate from test work resulting from cables being disconnected or from a simulation, must be erased in the fault memory after cornpleting the work.
amie = RA 07.3.1211-1687/2
