Preceding work:

WIS 05-2845

Preceding work: Cylinder head removed. Valves removed.

Inlet and exhaust valve guides ………65 … linspect with gauge in longitudinal and in transverse direction. For this purpose, check whether the NO GO end with the wear limit size (+ 220) can be inserted into the valve guides over its entire height (6 mr). If the gauge can be inserted over its entire height, replace valve guide. Seat of valve stem seal on inlet and exhaust valv@ QUIdeS 22… eee eee aes examine. if seat worn so that valve stern seal is no longer tightly located, replace valve guide.

Valve guides:

Engine Valve guide ID Gauge Inlet Exhaust (special tool)

104.980/281 8mm – (1st version) 117 589 03 23 00 104.980/981 2nd version) 102 589 01 23.00 104.980 (1st version) 8 rom 102 589 00 23 00 – 102 589 00 23 00

104.980/981 (3rd version) – 104.990 (2nd version) – 7mm 104.940/941/942/943/944/ 104. 945/992/994/995/996 – 102 589 01 23 00

Preceding work: – rysunek

pecial tools

atin RA 05.1225-2845/1