Pressure-testing oil-to-coolant heat exchanger

WIS 18-1370

Pressure-testing oil-to-coolant heat exchanger – rysunek
Pressure-testing oil-to-coolant heat exchanger – rysunek

Preceding work: Operation no. of operation texts and work units or standard texts Oil-to-coolant heat exchanger removed (18-1320) and flat rates:

P18-5319–37

Oil-to-coolant heat exchanger ………0.00e clean. Opening (2) sees see eee ew eee seal air-tight. Tester (1) ……… ren seco aee connect. Oil-to-coolant heat exchanger ……… see pressurize with tester (1) to about 1.3 bar. Oil-to-coolant heat exchanger …………0. immerse in tank with warm water. Oil-to-coolant heat exchanger ………..00. inspect for any air bubbles flowing out.

Note Air bubbles indicate a leak; pinpoint more accurately where the air bubbles come from.

AN if a leak exists, replace oil-to-coolant heat exchanger.

othe RA 18.1234—-1370/1

Pressure-testing oil-to-coolant heat exchanger – rysunek

Data

hh =RA 18.1234-1370/2