Retrofitting coolant pump drain pipe

WIS 20-2255

Retrofitting coolant pump drain pipe – rysunek

Preceding work: Viscous fan coupling removed (20-3120). Poly V-belt removed (13-3420). Bek pulley/vibration damper removed (03-3420).

Belt pulleys at coolant pump and at fan bearing pedestal ………..02 ee ene eee remove, install (13-3450). Shock absorber of tensioning device remove, install (13-3450). 1st version (coolant pump with @ 7.5 mm hole) Connection fitting (1) 0.5.06 vee eee coat with adhesive. knock in with insertion drift (shop-made tool). Connection fitting (1) tenes Drainage pipe (2)… eee eee fit onto connection fitting (1) and run between crankcase and power steering pump support. and version (coolant pump 103 200 37 01 with @ 9.9 mm hole) coat with Loctite 648, 003 989 32 71. Drainage pipe (2) insert into 2 9.9 mm hole and run between Drainage pipe (2) crankcase and power steering pump support.

athe = RA 20.1133-2255/1

Shop-made tool

Retrofitting coolant pump drain pipe – rysunek

Insertion drift Material: structural steel e.g. St.37-k

Parts

Retrofitting coolant pump drain pipe – rysunek

Designation Part no.

astin = RA 20,1133-2255/2